Panasonic BB-HCM331A operating instructions Buffering or Transferring Images by Alarm Signal

Operating Instructions

2.20Buffering or Transferring Images by Alarm Signal

The Image Buffer/Transfer page allows you to enable image buffer/transfer by E- mail or FTP.

Note

If you are recording images to the SD memory card, refresh interval slows down.

1.Click [Buffer/Transfer] on the Setup page.

2.Click [No.] to enable buffer/transfer.

3.Check [Enable Image Buffer/Transfer], select [Alarm 1 or 2] for trigger, select [Rising: GND to Open (High).] or [Falling: Open (High) to GND.] and click [Next>].

Note

If you click [Save], all buffered images on the SD memory card are deleted.

•Click [Delete Buffered Images] to delete this buffered images.

•Click [Save] to save the settings.

•Clicking [Cancel] takes you back to the Image Buffer/Transfer page without saving changes.

92