Operating Instructions |
| |
2.16 | Configuring Multiple Cameras | 79 |
2.17 | Format the SD memory card | 81 |
2.18 | Stop the SD Memory Recording | 82 |
2.19 | Buffering or Transferring Images by Timer | 83 |
2.20 | Buffering or Transferring Images by Alarm Signal | 92 |
2.21 | Transfer the Camera Image in Transport Mode | 103 |
2.22 | Transfer the Camera Image in Tunnel Mode | 104 |
2.23 | Specifying Operation Time | 105 |
2.24 | Controlling External Output Terminal | 107 |
2.25 | Changing Indicator Display | 108 |
3 Camera Maintenance | 109 | |
3.1 | Maintenance page | 109 |
3.1.1 | Confirming the Status | 110 |
3.1.2 | Restarting the Camera | 110 |
3.1.3 Updating the Camera Firmware | 111 | |
3.1.4 | Creating Configuration File | 114 |
3.1.5 Loading Settings from a Configuration File | 115 | |
3.1.6 Resetting the Camera to Factory Default | 116 | |
3.2 | Support page | 117 |
3.2.1 | Seeing Help page | 117 |
3.2.2 | Seeing Product Information | 117 |
3.2.3 | Seeing Support Information | 118 |
3.3 | External I/O | 119 |
3.4 | FACTORY DEFAULT RESET Button | 121 |
3.5 | RESTART Button | 122 |
3.6 | Default Setting List | 123 |
3.7 | Cleaning | 131 |
3.7.1 Cleaning the Main Unit | 131 | |
3.8 | Setting an IP Address on Your PC | 132 |
3.9 | Using Setup Program | 133 |
3.10 | Setting Your PC | 136 |
3.10.1 Setting the Proxy Server Settings on Web Browser | 136 | |
3.10.2 | Setting UPnP™ to Display Camera Shortcut in My Network Places | 139 |
3.10.3 | Setting the Internet Temporary File Setting on Web Browser | 139 |
3.11 | ASCII Character Table | 140 |
10
