Operating Instructions
2.19 Buffering or Transferring Images by Timer
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E- mail or FTP.
Note
If you are recording images to the SD memory card, refresh interval slows down.
1.Click [Buffer/Transfer] on the Setup page.
2.Click [No.] to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Timer] for trigger, and click [Next>].
Note
If you click [Save], all buffered images on the SD memory card are deleted.
•Click [Delete Buffered Images] to delete this buffered images.
•Click [Save] to save the settings.
•Clicking [Cancel] takes you back to the Image Buffer/Transfer page without saving changes.
[For assistance, please call: | 83 |
