Operating Instructions
Automatic Setup (Local or Internet Access) or Manual Setup
1.Click [Execute] on the Camera List window shown on page 134.
2.Click each button to execute the program.
Sets up the camera to view on the LAN.
Sets up the Internet access to the camera.
Manually sets up the camera. Disables IPsec. If disabled, the button is displayed gray. 
Displays the Setup page (see page 37).
Notes
•For the first time installation or after pressing the FACTORY DEFAULT RESET button, you must select [Automatic Setup (Local Access Only)]. To start the Manual Setup, execute Automatic Setup (Local Access Only) first, and then start the Setup Program to execute the Manual Setup.
•See Installation/Troubleshooting for the local and Internet access setup.
Manual Setup window
Set up each parameter seeing page
•If "Camera setup completed" is displayed, click [Close] to finish the Manual Setup.
3.Close all Setup windows.
[For assistance, please call: | 135 |
