Panasonic BB-HCM331A operating instructions Setting, Description

Operating Instructions

7.Set the image buffer frequencies, and click [Next>].

Note

Due to the network environment, object, number of accesses, enabling IPsec, SD memory recording, the camera may not record the numbers of images as you set. In this case, set the image buffer frequencies longer. For the SD memory recording, 1 image per second setting is recommended.

•Clicking [<Back] takes you back to the previous page.

•Clicking [Cancel] takes you back to the Image Buffer/Transfer page without saving changes.

Setting	Description
Enable Pre-	• Check the box to enable the setting. The camera buffers or
trigger Image	transfers the image right before the alarm signal is
Buffer	detected.
	• Set an interval, number of images to buffer and total
	number. The buffered images may not match the total
	number due to memory capacity, image resolution, image
	quality or what object you view.
Enable Post-	• Check the box to enable the setting. The camera buffers or
trigger Image	transfers the image right after the alarm signal is detected.
Buffer	• Set an interval, number of images to buffer and total
	number. The buffered images may not match the total
	number due to memory capacity, image resolution, image
	quality or what object you view.

[For assistance, please call: 1-800-272-7033] 95