Panasonic BB-HCM331A Setting, Description, the camera, see page 47 The Top page is not displayed

	Operating Instructions
Setting	Description
Default Gateway*1	• If you have the assigned Default Gateway address by your
(Static/DHCP Only)	ISP or network administrator, enter it in this data field.
	• Set 4 digits (0—255) and 3 periods such as
	"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are
	not available.
DNS Server	• DNS server address is required in the following conditions.
Address*1	• Transferring camera images by E-mail or FTP
(Static/DHCP Only)	• Setting cameras by their host names on the Multi-
	Camera Setup page
	• Using the Viewnetcam.com service
	• If you have the assigned DNS server addresses by your
	ISP or network administrator, enter them in this data field.
	They usually have two addresses.
	• Set 4 digits (0—255) and 3 periods such as
	"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are
	not available.
Max. Bandwidth	• The bandwidth can be restricted.
Usage	• Select the maximum bandwidth usage from [Unlimited] to
	[0.1 Mbps].
	• This setting is valid in both IPv4/IPv6.
	Note
	Set the maximum bandwidth usage seeing the following
	file sizes. These are examples for a JPEG file with a
	standard image quality. File sizes may change depending
	on the image quality or how bright the object is.
	160 x 120 pixels: About 5 KB (40 Kbit)
	320 x 240 pixels: About 16 KB (128 Kbit)
	640 x 480 pixels: About 33 KB (264 Kbit)
Connection Type	• Select [Auto Negotiation] normally. If you cannot access
	the camera, see page 47 "The Top page is not displayed."
	in the Installation/Troubleshooting.
	• This setting is valid in both IPv4/IPv6.

*1 If you automatically obtain the IP address from the DHCP server, you do not need to set it.

[For assistance, please call: 1-800-272-7033] 43