Confirming that You Can Access the Camera

Operating Instructions

Setting up the IPv6 Router, your PC, and the Camera

Setting up the IPv6 Router

Set up the router as you subscribe to the IPv6 service. If the access from WAN side is disabled on the router, enable the TCP packets from WAN side in the packet filtering. See the Panasonic Network Camera support website at http:// panasonic.co.jp/pcc/products/en/netwkcam/ for information about the recommeded routers.

Setting up your PC

1.Click [Start] [All Programs] [Accessories] [Command Prompt].

•Command Prompt window is displayed.

2.Enter "ipv6 install".

•"Succeeded" is displayed.

Note

If Windows XP Service Pack 1 is not installed, "Succeeded" will not be displayed. Install it on your PC.

3.Enter "ipconfig".

•If the IPv6 address is properly assigned to your PC, IPv6 address will be displayed on the window.

Setting up the Camera

Usually, IPv6 address is automatically assigned. If you assign a static IPv6 address, see page 44. To access the camera in IPv6, you need to subscribe to the domain name service such as Viewnetcam.com, and register the URL.