Panasonic PT-LB20V manual RGB2 Select, Rgb/Ypbpr, Sxga Mode, Blackboard, Back Color, Front/Rear

RGB2 SELECT

This setting is used to select the function of the RGB2 IN/1 OUT connector.

RGB/YPBPR

RGB/YPB PR	AUTO
	[
	RGB
	[
	YPB PR

This should normally be set to “AUTO”. RGB or YPBPR is selected automatically depending on the synchronising signal status.

When 480i, 576i, 480p, 576p,

1 080/60i, 1 080/50i, 720/60p and some VGA480 signals are being input, select “RGB” or “YPBPR” in accordance with the input signal.

VGA60/480p

VGA60/480p 480p

[

VGA60

Set to “VGA60” when 59.9Hz VGA480 signals are being input (refer to page 62 for details). Set to “480p” when 480p RGB signals are being input.

SXGA MODE

SXGA MODE	SXGA
	[
	SXGA+

This setting is only for an SXGA signal.

SXGA

Select this item normally.

SXGA+

When the edges of the projected image are not visible, select this item.

Noise Reduction (NR)

(S-VIDEO/VIDEO only)

If the signal is of such poor quality that picture interference appears, set “NR” to “ON”. To turn off the “NR” feature, set to “OFF”.

BLACKBOARD

Set to “ON” when “PICTURE MODE” is set to “BLACK-BD”. (Refer to page 37.)

BACK COLOR

BACK COLOR	BLUE
	[
	BLACK

This sets the color which is projected onto the screen when no signal is being input to the projector.

FRONT/REAR

FRONT/REAR FRONT

[

REAR

This setting should be changed in accordance with the projector setting-up method.

(Refer to page 18.)

FRONT

When the projector is placed in front of a screen.

REAR

When using a translucent screen.

46-ENGLISH