&Press the F or G button to select an item, and then press the I or H button to change or adjust the setting.
An individual adjustment screen such as the one shown below will be displayed for bar scale items.
BRIGHT | 32 |
The bar scale will turn green when any adjustment changes the setting from the factory set value.
Unavailable on-screen menu items
This projector has unadjustable items and unusable functions depending on the signal being input.
When an item cannot be adjusted or a function cannot be used, the corresponding
Returning a setting to the factory default
If you press the STD (standard) button on the remote control unit, you can return settings to the factory default settings. However, the operation of this function varies depending on which screen is being displayed.
BWhen a menu screen is being displayed
PICTURE | STD | |
PICTURE MODE | STANDARD | |
CONTRAST |
| 32 |
BRIGHT |
| 32 |
COLOR |
| 32 |
TINT |
| 32 |
SHARPNESS |
| 8 |
COLOR TEMP. | STANDARD | |
DAYLIGHTVIEW |
|
|
AI |
| ON |
| AUTO | |
STILL MODE |
| OFF |
STANDARD
SELECT
ENTER 
RETRN
All items displayed will be returned to their factory default settings, “STD” will be displayed in the top- right screen and the bar scale will appear white.
NOTE:
BYou can also select
“STANDARD” from the menu screen and then press the ENTER button.
BWhen an individual adjustment screen is being displayed
BRIGHT | 32 |
Only the item displayed will be returned to the factory default setting, and the bar scale will appear white.
NOTE:
BTriangle symbols above and below the bar scale indicate the factory default setting. Items which do not have these triangle symbols cannot be returned to the factory default setting.
Indicates the standard factory default setting
Indicates the current adjustment value
BThe positions of triangle symbols vary depending on the type of signal being input.
