Panasonic PT-LB20V manual FRONT/REAR Front DESK/CEILING, Control KEY Auto POW.OFF Disable, Select

'Install the lamp unit cover, and then use a Phillips screwdriver to securely tighten the lamp unit cover fixing screws.

NOTE:

BBe sure to install the lamp unit and the lamp unit cover securely. If they are not securely installed, it may cause the protection circuit to operate so that the power cannot be turned on.

(Connect the power cord.

)Press the POWER button so that a picture is projected onto the screen.

NOTE:

BIf the power cord was disconnected during projection when the projector was used the last time, projection will start after the power cord is connected (when “POWER MEMORY” in the “OPTION” menu is set to “ON”). Refer to page 48 for details.

*Press the MENU button to display the “MAIN MENU”, and then press the F or G button to select “OPTION”.

MENU

KEYSTONE

PICTURE

POSITION

INDEX WINDOW

SHUTTER

VOLUME

LANGUAGE

OPTION

SECURITY

NETWORK

SELECTENTEREXIT

+Press the ENTER button to display the “OPTION” menu, and then press the F or G button to select “LAMP RUNTIME”.

OPTION

		▲
BACK	COLOR	BLUE
FRONT/REAR		FRONT
DESK/CEILING		DESK
FAN	CONTROL	STANDARD
LAMP	POWER	HIGH
LAMP	RUNTIME	1820H
FUNC	1	DAYLIGHT
CONTROL KEY		ON
AUTO POW.OFF DISABLE
POWER MEMORY		ON
SELECT		RETRN

,Press and hold the ENTER button for approximately 3 seconds.

OPTION

		▲
BACK	COLOR	BLUE
FRONT/REAR		FRONT
DESK/CEILING		DESK
FAN	CONTROL	STANDARD
LAMP	POWER	HIGH
TIME	RESET [POWER OFF]
FUNC	1	DAYLIGHT
CONTROL KEY		ON
AUTO POW.OFF DISABLE
POWER MEMORY		ON
SELECT		RETRN

The “LAMP RUNTIME” will change to “TIME RESET [POWER OFF]”.

NOTE:

BIf the MENU button is pressed, the lamp time resetting screen will be cancelled.

-Turn off the power and disconnect the power cord. This will reset the cumulative usage time for the lamp unit to “0”. Refer to page 26 for details on how to turn off the power.

Care and maintenance

ENGLISH-57