Turning off the power
POWER button
#
$
POWER
INPUT
VIDEO RGB
AUTO
SETUPMENU
ENTER
FREEZESHUTTER
STD
VOLUMED.ZOOM
INDEX
WINDOW
PROJECTOR
% Powercord
#Press the POWER button.
B“POWER OFF” is displayed on the
screen.
POWER OFF OK CANCEL
$Press the I or H button to select “OK”, and then press the ENTER button.
BThe lamp unit will switch off and the picture will stop being projected. (The POWER button on the projector will illuminate orange while the cooling fan is still operating.)
%Disconnect the power cord after the POWER button on the projector illuminates red.
NOTE:
BYou can also turn off the power by pressing the POWER button twice or by holding it down for at least 0.5 seconds.
BWhen the projector is in standby mode (the POWER button on the projector is illuminated red), the projector continues to draw approximately 4 W of power even when the cooling fan has stopped.
