Panasonic PT-LB20S manual # Power input socket AC, RGB1 in connector pages 21, Video in connector

Connector panel						Preparation
$	%	&	'	)	*
	#		(

#Power input socket (AC IN) (page 24)

The accessory power cord is connected here.

Do not use any power cord other than the accessory power cord.

$SERIAL connector (pages 21, 22 and 64)

This connector is used to connect a personal computer to the projector in order to control the projector externally. (RS-232C compatible)

%RGB1 IN connector (pages 21 and 22)

This connector is used to input RGB signals and YPBPR signals.

&RGB2 IN/1 OUT connector (pages 21, 22 and 46)

This connector is used to input or output RGB signals and YPBPR signals. Adjust “RGB2 SELECT” in the “OPTION” menu to select whether you want input or output with this connector.

'S-VIDEO IN connector (pages 22 and 42)

This connector is used to input signals from S-VIDEO-compatible equipment such as a video deck. The connector is S1 signal compatible, and it automatically switches between 16:9 and 4:3 aspect ratios in accordance with the type of signal being input.

(VIDEO IN connector (page 22)

This connector is used to input video signals from video equipment such as a video deck.

)AUDIO IN L-R connectors (pages 21 and 22)

*Menu operation (page 16)

ENGLISH-15