Panasonic PT-LB20S, PT-LB20NT, PT-LB20V Desk/Ceiling, FAN Control, Lamp Power, Lamp Runtime, Func

DESK/CEILING

DESK/CEILING DESK

[

CEILING

This setting should be changed in accordance with the projector setting-up method.

(Refer to page 18.)

DESK

When the projector is placed on a desk or similar.

CEILING

When the projector is suspended from a ceiling using the ceiling bracket (sold separately).

FAN CONTROL

FAN CONTROL STANDARD

[

HIGH

Set “FAN CONTROL” to “HIGH”, when using this projector at high elevations (above 1 400 m) only.

LAMP POWER

LAMP POWER	HIGH
	[
	LOW

This setting changes the lamp brightness. When set to “LOW”, the luminance of the lamp is reduced, but the projector uses less power, and the operating noise is also reduced. This can help to extend the lamp’s operating life. If using the projector in small rooms where high luminance is not required, it is recommended that you set the “LAMP POWER” to “LOW”.

NOTE:

B“LAMP POWER” cannot be set when no signal is being input.

LAMP RUNTIME

This setting displays the usage time for the lamp unit which is currently being used. When replacing the lamp unit, follow the instructions on page 56, and reset “LAMP RUNTIME” to “0”.

NOTE:

BThe lamp’s operating life varies depending on the usage conditions (such as the “LAMP POWER” setting and the number of times the power is turned on and off).

FUNC 1

FUNC1 DAYLIGHT

[

KEYSTONE

This assigns a function to the FUNC1 button of the ET-RM300 wireless remote control unit (sold separately).

DAYLIGHT

Functions in the same way as when “DAYLIGHTVIEW” is selected from the “PICTURE” menu. (page 39)

KEYSTONE

Functions in the same way as when “KEYSTONE” is selected from the “MAIN MENU”. (page 36)

Adjustments and settings

ENGLISH-47