Panasonic PT-LB20V Press the input select button to select the input signal, Adjusting the angle

&Press the input select button to select the input signal.

	Input select
Control	button
		RGB1	RGB2		NETWORK
panel	Changing
	signals	S-VIDEO		VIDEO
	Input select	VIDEO			RGB
	buttons
Remote						operation
		VIDEO	RGB1		RGB2
control	Changing
unit	signals			NETWORK
		S-VIDEO
BA picture will be projected in accordance with the selected input
						Basic
signal.
BWhen a YPBPR signal is being input, “YPBPR” will be displayed
instead of “RGB”.
B“NETWORK” is for PT-LB20NTU only.

Follow the procedure below when you set the projector up first, and when you change the setup place.

'Adjusting the angle

BWhile pressing the adjuster buttons, adjust the forward/back angle of tilt of the projector. Adjust so that the projected image is placed at the center of the screen.

(Press the AUTO SETUP button to initiate automatic positioning.

BThe tilt of the projector and the input signal will be detected and keystone distortion and the position of the image will be corrected.

(Refer to page 28 for details.)

AUTO SETUP

)Adjusting the size

BTurn the zoom ring to adjust the size of the projected image.

*Adjusting the focus

BTurn the focus ring to adjust the focus of the projected image.

ENGLISH-25