Connecting to other equipment

Loading still pictures or motion pictures

Preparations:

Turn on the camera and the PC.

Remove the card before using the pictures in the built-in memory.

Connect the computer and camera with the USB connection cable (supplied).

Check the directions of the connectors, and plug them straight in or unplug them straight out. (Otherwise the connectors may bend out of shape, which may cause malfunction.)

Do not use any other USB connection cables except the supplied one.

Use of cables other than the supplied USB connection cable may cause malfunction.

AUSB connection cable (supplied) B Align the marks, and insert.

Press 3/4 to select [PC], and then press [MENU/SET].

Operate the PC.

You can save the images into the PC by dragging and dropping the image, or the folder with the image that you would like to transfer onto a different folder in the PC.

Note

Use a battery with sufficient battery power. If the remaining battery power becomes low while the camera and the PC are communicating, the alarm beeps.

Refer to Disconnecting the USB connection cable safely(P103) before disconnecting the USB connection cable. Otherwise, data may be destroyed.

Before inserting or removing a card, turn the camera off and disconnect the USB connection cable. Otherwise, data may be destroyed.

- 102 -

Page 102
Image 102
Panasonic DMC-SZ1, DMC-FH8, DMC-SZ02/B, F1211WT0, VQT3Z52 owner manual 102, Loading still pictures or motion pictures