Panasonic DMC-TS4, DMC-TS4S 1, 2, 3

VQT4D89 (ENG)

1Check that there are no foreign objects on the in ner side of the side door.

ABrush (supplied)

BSide door

•If there is any foreign object, such as lint, hair, sand, etc., on the surrounding area,

water will leak within a few seconds, causing malfunction.

•Wipe it off with a soft, dry cloth if there is any liquid.

It may cause water leaks and malfunction if you use the camera with liquid adhered.

•If there is any foreign material, remove with supplied brush.

•Be extremely careful to remove the small sand etc. that may adhere to the sides and

corners of the rubber seal.

•Remove large foreign objects, wet sand, etc., using the shorter (harder) side of the

brush.

2Check for cracks and deformation of the ru bber seal on the side door.

•The integrity of the rubber seals may decrease after about 1year, with use and age. To

avoid permanently damaging the camera, the seals should be replaced once each

year. Please contact Panasonic’s Service Center for related costs and other

information.

3Close the side door securely.

CRed part

D[LOCK] switch (gray part)

EReleased state

FLocked state

•Lock the [LOCK] switch securely until the

red part is no longer visible.

•To prevent water seeping into the camera,

be careful not to trap foreign objects such

as liquids, sand, hair or dust, etc.

Check before using underwater

Do not open or close the side door i n pl ace s wit h sa nd a nd du st, c lo se t o wat er,

or with wet hands. Sand or dust adhering may cau se water leaks.

ロヰヤレ

VQT4D89~Body1_eng.fm 12 ページ２０１２年１月１８日　水曜日　午前９時２５分