Panasonic DMC-TZ10 Inserting and removing the card optional/the battery, Close lid, To remove

Inserting and removing the card (optional)/the battery

Set the camera ON/OFF switch	A
to OFF and slide the release
lever ( A ) to [OPEN] before
opening the lid

Picture save destination (cards and built-in memory)

■■Built-in memory (approx. 15 MB)

●●The built-in memory can be used as a temporary storage device when the card being used becomes full.

Completely insert battery and card

[OPEN] [LOCK]

●●The access time for the built-in memory may be longer than the access time for a card.

••Battery: Push in until the lever is locked

••Memory card: Push in until it clicks

BDo not touch terminal C Check orientation

Close lid

Slide to the [LOCK] position.

B

C

■■Compatible memory cards (optional)

The following SD standard-based cards (Panasonic brand recommended)

Type of Card	Capacity	Notes
SD memory	8 MB – 2 GB	••Can be used with devices
cards		compatible with the
SDHC memory	4 GB – 32 GB	respective formats.
cards		••Before using SDXC memory
SDXC memory	48 GB – 64 GB	cards, check that your
		computer and other devices
cards
		support this type of card.
		http://panasonic.net/avc/
		sdcard/information/SDXC.

Switch (LOCK)

■■To remove

••To remove battery:	••To remove card:
move lever in direction of arrow.	press down in centre.

Lever

●●Always use genuine Panasonic batteries (DMW-BCG10E).

●●If you use other batteries, we cannot guarantee the quality of this

product.

●●The card may be damaged if it is not fully inserted.

14 VQT2L71 (ENG)

html

••Cards in capacities not listed

at left are not supported.

●●If the write-protect switch is set to ‘LOCK’, the card cannot be used to record or delete pictures, and it cannot be formatted.

●●Latest information: http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)

●●Keep the Memory Card out of reach of children to prevent swallowing.

(ENG) VQT2L71 15