Inserting and removing the battery or

SD memory card (optional)

Make sure that the camera is turned off.

Slide the release lever ( ) to the [OPEN] position and open the card/ battery door

Insert the battery and card, making sure that their orientation is correct

• Battery: Insert the battery all the way firmly and check that it is locked by lever ().

• Card: Insert the card all the way firmly until it clicks. Do not touch the terminals on the back of the card.

Close the door

Slide the release lever to the [LOCK] position.

To remove

To remove battery:

To remove card:

Move lever in direction of

Push the card until it clicks, then pull

arrow.

the card out.

Lever

Press Pull out

Always use genuine Panasonic batteries (DMW-BCM13PP).

If you use other batteries, we cannot guarantee the quality of this product.

Keep the Memory Card out of reach of children to prevent swallowing.

We recommend using a Panasonic card.

14 VQT5E54 (ENG)

Page 14
Image 14
Panasonic DMC-ZS40 owner manual Close the door, To remove To remove battery To remove card