Before use
■Camera handling
●Keep the camera away from excessive vibration, force, or pressure.
●The camera is not dust resistant, splash resistant, or waterproof.
Avoid using the camera in places with excessive dust or sand, or where water can come into contact with the camera.
●Do not allow camera to come into contact with pesticides or volatile substances (can cause surface damage or coating to peel).
■Condensation (When the lens, the LCD monitor or the viewfinder is fogged up)
●Condensation may occur when the camera is exposed to sudden changes of temperature or humidity. Avoid these conditions, which may make the lens, the LCD monitor or the viewfinder dirty, cause mold, or damage the camera.
●If condensation does occur, turn off the camera and wait about two hours before using it. Once the camera adjusts to the surrounding temperature, the fogging will clear naturally.
■Caring for your camera
●Before cleaning the camera, remove the battery or disconnect the power
plug from the outlet.
●Do not press the LCD monitor with excessive force. ●Do not press the lens with excessive force.
●Do not keep rubber or plastic products in contact with the camera for a long period of time.
●Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the camera, since it may deteriorate the external case or the coating may peel off.
●Do not leave the camera with the lens facing the sun, as rays of light from the sun may cause it to malfunction.
●Do not extend the supplied cord or cable.
●While the camera is accessing the card or
camera or remove the battery, card, AC adaptor (supplied).
●The data on the
●Do not format the card on your PC or other equipment. Format it on the camera only to ensure proper operation.
(ENG) VQT5E54 9
