- 107 - VQT4V99
Using with your PC

Copying still pictures and motion pictures

Getting Ready:
• Use batteries with sufficient power.
• When importing pictures from the built-in memory, remove any memory cards.
• Turn on the camera and computer.

Connect camera to computer

Check the plug direction and insert it straight in.
(Damage to plug can lead to faulty operation.)
[Access] (sending data)
• Do not disconnect
the USB connection
cable while [Access] is
displayed. USB connection cable
(always use cable supplied)

Use cursor button on the camera to select [PC], and press

[MENU/SET]

Operate with your computer

• You can save pictures to use on your computer by dragging and dropping folders
and files into separate folders on your computer.
●Do not use any other USB connection cables except the supplied one. Doing so may
cause malfunction of the camera.
●Turn off the camera before inserting or removing memory cards.
●If the batteries run out while transmitting, a warning beep sounds. Cancel
communication via your computer immediately. Use batteries with sufficient power.
●For more details, consult your computer operating manual.