- 13 - VQT4V99
Attaching the lens cap/shoulder strap
Attaching the shoulder strap
We recommend attaching the shoulder strap (supplied) when using the camera to prevent
it from dropping.
Pass the shoulder strap through the
shoulder strap eyelet on the camera
body
• Attach the shoulder strap so that the “LUMIX” Logo is
on the outside.
Shoulder strap eyelet
Pass the end of the shoulder strap
through the ring in the direction of the
arrow and then pass it through the
stopper
Pass the end of the shoulder strap
through the hole on the other side of the
stopper
Pull the other side of the shoulder strap
and then check that it is secure
• Perform steps to and then attach the other side
of the shoulder strap.
●Be sure to follow the steps and attach the shoulder strap correctly.
●Check that the shoulder strap is firmly attached to the camera.
●Use the shoulder strap around your shoulder.
• Do not wrap the strap around the neck. It may result in injury or accident.
●Do not leave the shoulder strap where an infant can reach it.
• It may result in an accident by mistakenly wrapping around the neck.