Caring of the camera after using it underwater
1With the card/battery door and
terminal cover closed, rinse with water, or if it was used in the sea, soak the unit in fresh water in a shallow container for 10 minutes or less.
•If you have attached the silicon jacket, be sure to rinse the camera after removing it.
•Leaving the camera with foreign objects or saline matter on it may cause damage, discoloration, corrosion, unusual odour, or deterioration.
2Wipe off the water, and dry the
camera by standing it on a dry cloth in a well ventilated shaded area.
3 Confirm there is no water on the camera, and open the card/battery door and terminal cover.
4Wipe off any water or sand inside
the card/battery door and terminal cover with a soft dry cloth.
16 VQT2M30 (ENG)
