Inserting and Removing the Card (optional)/the Battery
•Check that this unit is turned off.
•Confirm that there is no foreign object.
•We recommend using a Panasonic card.
1:Slide the [LOCK] switch B, and release the lock.
2:Slide the release lever A and open the card/battery door.
• Always use genuine Panasonic batteries
•If you use other batteries, we cannot guarantee the quality of this product.
Battery: Insert until it is locked by the lever C being careful about the direction you insert it. Pull the lever C in the direction of the arrow to remove the battery.
Card: Push it fully until it clicks being careful about the direction you insert it. To remove the card, push the card until it clicks, then pull the card out upright.
D:Do not touch the connection terminals of the card.
•The card may be damaged if it is not fully inserted.
Close the card/battery door until it clicks, and then lock the [LOCK] switch by sliding it toward [2].
24 VQT2M30 (ENG)
