the discharged battery(ies). (Applies to products employing more than one separately replaceable primary battery.)

8When inserting battery(ies) into this product, the proper polarity or direction must be observed. Reverse insertion of battery(ies) can cause charging, and that may result in leakage or explosion.

9Remove battery(ies) from this product if storing over 30 days because the battery(ies) could leak and damage the product.

10Discard “dead” battery(ies) as soon as possible since “dead” batteries are more likely to leak in a product.

11Do not store this product, or the battery(ies) provided with or identified for use with this product, in high temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from condensation during storage and defrosting. Batteries should be stabilized at room temperature prior to use after cold storage.

12If your product uses rechargeable battery(ies), charge the battery(ies)

only in accordance with the instructions and limitation specified in the User Manual.

SAVE THESE INSTRUCTIONS

2Environment and safety

2.1Safety information This telephone is not designed for making emergency telephone calls when the power fails. An alternative should be made available for access to emergency calling.

2.2Power requirements

This product requires an electrical supply of 120 volts, single phase alternating current, excluding IT installations defined in standard UL 60950.

2.3Battery requirements

The handset requires power source of two rechargeable NiMH batteries, size

AAA1.2V 600mAh (Hr11/45). IF THE INCORRECT TYPE OF BATTERIES ARE USED,A WARNING MESSAGE WILL BE DISPLAYED.

Use only Philips Multi-Life 600mAh rechargeable NimH batteries.

For servicing or replacement, you can purchase a suitable headset through service centre or retail shop.

2.4Telephone connection

The voltage on the network is classified as TNV- 3 (Telecommunication Network Voltages, as defined in the standard UL

6

Environment and safety

Page 7 Page 9
Page 8
Image 8
Philips SE4502B manual Environment and safety, Battery requirements, Telephone connection
Page 7 Page 9

SE4502B specifications

The Philips SE4502B is a standout model in the landscape of advanced healthcare technology, specifically designed for patient monitoring and diagnostic purposes. This device is equipped with a range of features that enhance its usability and functionality, making it an invaluable tool for healthcare professionals.

One of the primary features of the SE4502B is its high-resolution display. The bright, clear screen allows for easy visibility of critical patient data, even in low-light environments. This is crucial in emergencies where quick and accurate readings can make significant differences in patient outcomes.

The SE4502B is powered by state-of-the-art monitoring technologies that ensure real-time data collection and analysis. The device captures vital signs such as heart rate, blood pressure, respiratory rate, and temperature, all of which are essential for comprehensive patient assessments. The integration of advanced algorithms allows for precise measurements, minimizing errors and improving the reliability of the data collected.

Another notable aspect of the SE4502B is its connectivity options. The device is designed to seamlessly integrate with existing hospital systems, allowing for efficient data sharing and management. This connectivity not only boosts the operational efficiency of healthcare facilities but also supports telemedicine applications, broadening access to care for patients in remote locations.

Durability and ease of use are also key characteristics of the Philips SE4502B. The device is built to withstand the rigors of a clinical environment, ensuring longevity and consistent performance even under stress. Its user-friendly interface simplifies operation, allowing healthcare providers to focus more on patient care rather than navigating complex systems.

Moreover, the SE4502B includes customizable alerts and notifications, which help healthcare teams respond swiftly to changes in a patient’s condition. The ability to tailor these alerts based on individual patient needs enhances the overall quality of care.

In summary, the Philips SE4502B is a sophisticated and reliable device that combines advanced monitoring technologies with practical features tailored for real-world medical settings. Its high-resolution display, real-time monitoring, seamless connectivity, and durability make it an essential tool for healthcare providers dedicated to delivering high-quality patient care. The SE4502B is a testament to Philips’ commitment to innovation in healthcare technology, significantly improving patient monitoring and outcomes in clinical settings.
Top Page Image Contents