![](/images/new-backgrounds/1210907/21090759x1.webp)
7 Using your phone
7.1Make a call
7.1.1 Predialling
1Enter the number. (A maximum of
24 digits including * and # are allowed. Press c Clear to delete
the last digit.) Or long press to delete all.
2Press t.
• The call is initiated.
7.1.2 Direct dialling
1Pick up the handset and press t.
(Or press l to start a call in speaker mode.)
2Dial the number.
• The call is initiated.
7.1.3Call from redial list 1 Press r in idle mode.
2 Scroll n to an entry in the redial
list.
3 Press t.
•The call is initiated.
Note
•In multihandset packs, each handset has its own redial list.
•You can also press t first and then press c Redial to enter the redial list. Then scroll n to select a number in the list and press o Select. The
number is dialed automatically.
7.1.4Call from the call log
Note
• In multihandset packs, the call log is shared between all handsets.
• You need to subscribe to Caller Line Identification service to be able to see the caller’s number or name in the call log. See section 8.9.1 - “Access the
Call log”.
1 Press u in idle mode, then scroll n to an entry in the call list.
Note
If the list is empty, then “List Empty” is
displayed.
2 Press t.
•The call is initiated.
7.1.5Call from the phonebook 1 Press d in idle mode.
2 Scroll n to a phonebook entry.
3 Press t.
•The call is initiated.
Tip
Instead of scrolling n to browse the phonebook entries, you can press the numeric key corresponding to the first letter of the entry you wish to locate.
For example, pressing 2 will show the entries starting with A. Pressing 2 again will show the entries starting with B, etc.
7.1.6Call from the phonebook while already on the phone
1While on the phone, press o Option and then o Select to
enter the phonebook name list.
2Scroll n to a phonebook entry.
28 | Using your phone |