NOTES: This equipment may not be used on coin service provided by the telephone company.

3.1Power requirements

•This product requires an electrical supply of 100-240 volts AC. In case of power failure, the communication can be lost.

•The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible.

•The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard

UL 60950.

Warning

To avoid damage or malfunction:

•Do not allow the charging contacts or the battery to come into contact with metal objects.

•Do not open it as you could be exposed to high voltages.

•Do not allow the charger to come into contact with liquids.

•Never use any other battery than the one delivered with the product or recommended by Philips: risk of explosion.

•Always use the cables provided with the product.

•Handsfree activation could suddenly increase the volume in the earpiece to

a very high level: make sure the handset is not too close to your ear.

•This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls.

•Do not expose the phone to excessive heat caused by heating equipment or direct sunlight.

•Do not drop your phone or allow objects to fall on your phone.

•Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives as these may harm the set.

•Do not use the product in places where there are explosive hazards.

•Do not let small metal objects come into contact with the product. This can deteriorate audio quality and damage the product.

•Active mobile phones in the vicinity

may cause interference. About operating and storage temperatures:

•Operate in a place where temperature is always between 0 and 35º C (32 to 95º F).

•Store in a place where temperature is always between -20 and 70º C (-4 to 158º F).

•Battery life may be shortened in low temperature conditions.

Important

11

Page 12 Page 14
Page 13
Image 13
Philips SE4502B manual Power requirements
Page 12 Page 14

SE4502B specifications

The Philips SE4502B is a standout model in the landscape of advanced healthcare technology, specifically designed for patient monitoring and diagnostic purposes. This device is equipped with a range of features that enhance its usability and functionality, making it an invaluable tool for healthcare professionals.

One of the primary features of the SE4502B is its high-resolution display. The bright, clear screen allows for easy visibility of critical patient data, even in low-light environments. This is crucial in emergencies where quick and accurate readings can make significant differences in patient outcomes.

The SE4502B is powered by state-of-the-art monitoring technologies that ensure real-time data collection and analysis. The device captures vital signs such as heart rate, blood pressure, respiratory rate, and temperature, all of which are essential for comprehensive patient assessments. The integration of advanced algorithms allows for precise measurements, minimizing errors and improving the reliability of the data collected.

Another notable aspect of the SE4502B is its connectivity options. The device is designed to seamlessly integrate with existing hospital systems, allowing for efficient data sharing and management. This connectivity not only boosts the operational efficiency of healthcare facilities but also supports telemedicine applications, broadening access to care for patients in remote locations.

Durability and ease of use are also key characteristics of the Philips SE4502B. The device is built to withstand the rigors of a clinical environment, ensuring longevity and consistent performance even under stress. Its user-friendly interface simplifies operation, allowing healthcare providers to focus more on patient care rather than navigating complex systems.

Moreover, the SE4502B includes customizable alerts and notifications, which help healthcare teams respond swiftly to changes in a patient’s condition. The ability to tailor these alerts based on individual patient needs enhances the overall quality of care.

In summary, the Philips SE4502B is a sophisticated and reliable device that combines advanced monitoring technologies with practical features tailored for real-world medical settings. Its high-resolution display, real-time monitoring, seamless connectivity, and durability make it an essential tool for healthcare providers dedicated to delivering high-quality patient care. The SE4502B is a testament to Philips’ commitment to innovation in healthcare technology, significantly improving patient monitoring and outcomes in clinical settings.
Top Page Image Contents