KTI Networks KF-16MS manual 1X 16X RJ-45 Connectors, AC Power Socket, AC Power Switch

•1X - 16X RJ-45 Connectors

MDI-X jacks for Port #1 - Port #16 respectively

•16I RJ-45 Connector MDI-I jack for Port #16

•Diagnostic LED indicators

The indicators provide the operating status of the hub and the network ports. The status includes power, activity status for 10M segment, activity status for 100M segment, collision status for 10M segment, collision status for 100M segment, 10M link status per port, 100M link status per port, partition status per port.

•Cascade Connectors

The connectors are used for cascading more than one hub as a hub stack. The connectors are labeled IN and OUT respectively for KF-16M. KF-16MS provides IN cascade connector only.

•AC Power Socket

This socket is used for plugging an AC power cord.

•AC Power Switch

This switch is used for turning the AC power to the hub unit on or off.

9