•A validation tone is emitted and the screen returns to the Alarm
menu. And the alarm icon | is |
displayed. |
|
•If you select Off, a validation tone is emitted and the screen returns to the Clock & Alarm menu.
Note
The alarm tone and alarm icon will sound/blink for 1 minute when the alarm time is reached. To mute the alarm tone, simply press any key on the handset.
8.12.4 Set Alarm Tone
1Press m in idle mode, scroll n to Clock & Alarm, and press o
Select.
2Scroll n to Alarm Tone and press o Select.
3Scroll n to select the tone. (Three
tones are available. The tones sound as you scroll.) Press o Select to
confirm your selection.
•A validation tone is emitted and the screen returns to the Clock & Alarm menu.
9 Personal settings
9.1Change the Handset Name You can name the handset and display the handset name in idle mode. The default handset name of your handset is Philips.
1Press m in idle mode, scroll n to Personal Set and press o
Select.
2Handset Name is highlighted; press o Select.
3The last stored name is displayed.
Press c Clear to delete the characters one by one or a long press to delete all.
4Enter the new name and press o OK to confirm.
•A validation tone is emitted and the screen returns to the Personal Set menu.
9.2Handset Tones
9.2.1Set the Ring Volume
Danger
When the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing.
In multihandset packs, you can set the ring volume independently on each registered handset. There are 5 ringer volume levels plus progressive and off.
The default is level 3.
1 Press m in idle mode, scroll n to Personal Set, and press o
Select.
2 Scroll n to Handset Tones and press o Select. Ring Volume is highlighted; press o Select.
40 | Personal settings |
