Panasonic DMP-BD10A warranty Adjusting picture and sound quality, Adjusting the picture

Playback 11 Adjusting picture and sound quality

Adjusting picture and sound quality

CONTRAST BRIGHTNESS SHARPNESS COLOR

INTEGRATED

GAMMA 3D-NR DNR RE-MASTER

Adjusting the picture

During video playback, pressing each of the following buttons will display the corresponding on-screen adjustment as shown in the illustration on the right. Adjustments are made in units of 1 each time the button is pressed. You can also make the same adjustments by pressing the left or right cursor keys.

Contrast

0

Press the buttons below.

CONTRAST	Contrast
	Increases the contrast between light and dark parts
	of the picture (j7 to i7).
	Brightness
BRIGHTNESS
	Brightens the picture (0 to i15).
	Sharpness
SHARPNESS	Adjusts the sharpness of the edges of the horizontal
	lines (j6 to i6).
	Color
COLOR
	Adjusts the shade of the picture’s color
	(j7 to i7).

GAMMA

3D-NR

INTEGRATED

DNR

Gamma

Adjusts the brightness of dark portions of the screen (0 to i5).

3D-NR (Noise Reduction)

Reduces the rough noise in the background to give a greater feeling of depth (0 to i4).

Integrated DNR

(Digital Noise Reduction)

Smooths block noise and reduces the smudging that appears around contrasting sections of the picture (0 to i3).

Reproducing more natural audio

The purpose of the Re-master function is to add audio to portions of a track where audio was not recorded, or to reproduce audio signals that were lost in a natural, rich manner.

	RE-MASTER	Re-master
		[DVD-V]§[DVD-VR]§[CD]
≥During multi-channel output					§ Tracks recorded with 48 kHz only
	This feature reproduces the frequencies lost during recording to give you a sound closer				≥This may not work depending on the
	to the original.
≥During 2 ch output					NOTE disc’s recording.
	This feature gives you a more natural sound by adding higher frequency signals not				≥When connecting with DIGITAL
					AUDIO OUT terminal, the actual
	recorded on the track. (For example, playing DVD-Video recorded with 48 kHz at 96 kHz.)
					output sampling frequency depends
Press [RE-MASTER] to select “1”, “2” or “3”.					on “Digital Audio Output” setting in
					“Audio” tab (➡ 22).
“Re-Master” has three different modes. Select the one that you like best.
	Setting		When playing LPCM sound	Other types of sound
			Type of music	Effect level
	1		High tempo (e.g., pop and rock)	Light
	2		Various tempos (e.g., jazz)	Medium
	3		Low tempo (e.g., classical)	Strong
	Off		Off	Off

RQT8997

14