Panasonic DMP-BD10A warranty Display, Connection, Dts-Hd

Settings 11 Changing the unit’s settings

Tabs	Menus	Options (Underlined items are the factory presets.)
Video	Still Mode ( paused video ) [DVD-V]	≥Automatic
	Select the type of picture shown when you pause	≥Field:		Select if jittering occurs when “Automatic” is selected.
	playback (➡ 29, Frames and fields).			(The picture is coarser.)
		≥Frame: Select if small text or fine patterns cannot be seen
				clearly when “Automatic” is selected. (The picture is
				clearer and finer.)
	Seamless Play	≥On: The chapters in playlists are played seamlessly. This
	Select the play mode between playlist chapter		does not work when there are several audio types
	segments and partially deleted titles.		included on the playlist. Additionally, the positioning of
			chapter segments may change slightly.
		≥Off:	The points where chapters in playlists change are played
			accurately, but the picture may freeze for a moment.
	Black Level Control	≥Lighter:		When video is output from VIDEO OUT or S VIDEO
	Select lighter or darker for adjusting the black level			OUT terminal.
	control to the desired setting for picture enhancement.	≥Darker:		When video is output from COMPONENT VIDEO OUT
				terminal.
Audio	Dynamic Range Compression	≥On		≥Off
	[BD-V][DVD-V](Dolby Digital, Dolby Digital Plus and Dolby

TrueHD only)

Change the dynamic range (➡ 29, Glossary) for late night viewing.

Digital Audio Output

Change the settings when you have connected equipment through this unit’s digital audio out terminal (➡ 10). ≥Press [ENTER] to show the following settings.

PCM Down Conversion			≥On:	Signals are converted to 48 kHz or 44.1 kHz. (Choose
Select how to output audio with a sampling frequency				when the connected equipment cannot process signals
of 96 kHz or 88.2 kHz.				with sampling frequency of 96 kHz or 88.2 kHz.)
≥Signals are converted to 48 kHz or 44.1 kHz despite the			≥Off: Signals are output as 96 kHz or 88.2 kHz. (Choose when
	settings across if the signals have a sampling frequency			the connected equipment can process signals with
	of over 96 kHz or 88.2 kHz, or the disc has copy			sampling frequency of 96 kHz or 88.2 kHz.)
	protection.
≥[BD-V]Refer to “BD-Video Function Sound”
	(➡ below).
Dolby Digital		Select how to output the signal. If	≥Bitstream: When connecting to equipment displaying the
		“Bitstream” is selected, the		Dolby Digital logo.
		bitstream is output from the unit	≥PCM:	When connecting to equipment not displaying the
		and the connected equipment		Dolby Digital logo.
		decodes the signal.
Dolby Digital Plus/			≥Bitstream: The bitstream signal of Dolby Digital is output.
Dolby TrueHD		If “PCM” is selected, this unit	≥PCM:	Dolby Digital Plus or Dolby TrueHD PCM sound is
		decodes the signal and output it
		as 2 channel from DIGITAL		output in 2 channels.
		AUDIO OUT terminal.
		[Note]
		Not making the proper settings
		may result in noise, or some
DTS		trouble for digital recording.	≥Bitstream: When connecting to equipment displaying the DTS
				logo.
			≥PCM:	When connecting to equipment not displaying the
				DTS logo.

RQT8997

22

	DTS-HD			≥Bitstream: The bitstream signal of DTS Digital Surround is
				≥PCM:	output.
					DTS-HD PCM sound is output in 2 channels.
	BD-Video Function Sound [BD-V]			≥On	≥Off
	This will set the operation sounds you hear from the menu, [Note]:When “On” is selected, sampling frequency is converted to
	etc. while playing a BD-Video disc. Please note that if you			48kHz. Sound is output at higher than 48kHz sampling
	have selected “Bitstream” digital audio output (➡ above),			frequency only when both this item and “PCM Down
	these sounds will not be heard even if this is set to “On”.			Conversion” are set to “Off”.
Display	Status Messages		≥Automatic		≥Off
	Choose whether to show status messages automatically.
	On-screen Language		≥English		≥Español ≥Français
	Choose the language for these menus and on-screen
	messages.
	FL Display		≥Bright
	Changes the brightness of the unit’s display.		≥Dim:		The display is dimmed and the illumination lamp is
					turned off.
			≥Automatic: The display is dimmed and the illumination lamp is
					turned off during playback, and reappears if a
					button is pressed.
	License		Information about the software used by this unit is displayed.
Connection	TV Aspect	Regular aspect television (4:3)
	Set to match the type of television connected.	≥4:3 Pan & Scan: Video recorded for a widescreen is played as Pan
					& Scan (unless prohibited by the producer of the
					disc). When playing BD-Video, video is output as
		≥4:3 Letterbox:			“4:3 Letterbox”.
					Video recorded for a widescreen is played in the
					letterbox style.
		Widescreen television(16:9)
		≥16:9:			Video recorded for 4:3 aspect screen is displayed
					as a 4:3 ratio image in the center of the screen.
		≥16:9 Full:			Video recorded for 4:3 aspect screen is displayed
					as a horizontally stretched 16:9 image.
	Component Video Resolution	≥480i			≥480p
	This sets the video output resolution when using the	≥720p			≥1080i
	component video terminal.