Panasonic DMP-BDT500 owner manual Connecting to an amplifier/receiver, Hdmi cable

STEP 2 : Connecting to an amplifier/receiver

Perform either one of the following connections in accordance with your amplifier/receiver input terminal.

HDMI AV OUT MAIN

HDMI cable				HDMI cable
	HDMI IN	HDMI OUT			HDMI IN
			(ARC)		(ARC)

Amplifier/receiver

≥Set “Digital Audio Output” (> 29).

≥When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV via HDMI AV OUT, then connect the TV and the amplifier/receiver. Please note, however, that the audio can only be up to 5.1ch.

≥When using the TV or amplifier/receiver that does not have the indication of “(ARC)” (non-ARC-compatible) on the HDMI terminal, in order to enjoy TV’s sound by amplifier/receiver it is also required to connect the amplifier/receiver and TV using an optical digital cable.

HDMI AV OUT SUB

You can enjoy richer sound by using the HDMI AV OUT SUB terminal.

HDMI cable	HDMI cable
HDMI IN	HDMI IN

Amplifier/receiver

≥Set “HDMI(SUB) Output Mode” to “V.OFF”. (> 28)

– Audio is output in high resolution regardless of compatibility of the amplifier/receiver with 3D.

≥It is possible to playback 3D videos and 3D still pictures when the connected TV is 3D compatible, even if the amplifier/receiver is not 3D compatible.

≥The HDMI connection using HDMI AV OUT MAIN supports VIERA Link “HDAVI Control” (> 24). The HDMI AV OUT SUB terminal is not compatible with the VIERA Link “HDAVI Control”.

Connections & Settings

VQT3V91 11