Panasonic DMR-E95H Frequently asked questions

RQT7392

Reference

Frequently asked questions

Set up Page

Disc

Recording

TV Guide On ScreenTM system

What equipment is necessary to play

multi channel surround sound?

≥ DVD-Video:

You can play DVD-Video multi channel surround by digitally connecting an amplifier

equipped with a Dolby Digital and a DTS decoder.

≥DVD-Audio:

This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound.

—

Are the headphones and speakers

directly connected to the unit?

≥You cannot directly connect to the unit. Connect through the amplifier, etc. 9

The television has both S-VIDEO IN

terminal and COMPONENT VIDEO

IN terminals. Which terminal should I

connect with?

≥We recommend the COMPONENT VIDEO IN terminal. Component signal outputs the

color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve

high fidelity in reproducing colors.

If the television is compatible with progressive output, a high quality picture can be

output because this unit’s component video output terminal outputs a progressive

output signal.

Is my television progressive output

compatible?

≥All Panasonic televisions that have 480P input terminals are compatible. Consult the

manufacturer if you have another brand of television.

—

Can I play DVD-Video, DVD-Audio

and Video CDs bought in another

country?

≥You can play them if the video standard is NTSC.

≥However, you cannot play DVD-Video if their region number does not include “1” or

“ALL”.

—

Cover

Can a DVD-Video that does not have

a region number be played?

≥The DVD-Video region number indicates the disc conforms to a standard. You cannot

play discs that do not have a region number.

—

Please tell me about DVD-R and

DVD-RW compatibility with this unit.

≥This unit records and plays DVD-R. However, you cannot record onto DVD-R discs that

are finalized.

≥This unit also records and plays high speed recording compatible discs.

≥This unit does not record or play DVD-RW.

—

Please tell me about CD-R and CD-

RW compatibility with this unit.

≥This unit plays CD-R/CD-RW discs (audio recording discs) which have been recorded

under one of the following standards: CD-DA, MP3 and Video CD. Close the session or

finalize the disc after recording.

≥You cannot write to a CD-R or CD-RW with this unit.

14, 27

—

Can I record from a commercially

purchased video cassette or DVD?

≥Most commercially sold video cassettes and DVD are copy protected; therefore,

recording is usually not possible.

—

Can a DVD-R recorded on this unit

be played on other equipment?

≥You can play on DVD-R compatible players after finalizing the disc on this unit; however,

due to the condition of the recording, play may not be possible.

How many times can I write to a

DVD-RAM disc?

≥You can write to the disc approximately 100,000 times depending upon the conditions of

use.

—

Can I high speed transfer (dub) to a

disc?

≥You can record up to 32k recording speed to DVD-R and up to 24k recording speed to

DVD-RAM when using a high speed compatible disc.

Can I record digital audio signals

using this unit?

≥You cannot record digital signals. The digital audio terminals on this unit are for output

only. (The audio recorded using the DV automatic recording function from a digital video

camcorder, for example, is recorded digitally.)

—

Can a digital audio signal from this

unit be recorded to other

equipment?

≥You can record if using the PCM signal. When recording DVD, change the “Digital Audio

Output” settings to the following from the SETUP menu.

–PCM Down Conversion On

–Dolby Digital PCM

–DTS PCM

However, only

–As long as digital recording from the disc is permitted.

–As long as the recording equipment is compatible with a sampling frequency of 48

kHz.

≥You cannot record MP3 signals.

—

Can I switch to SAP during

recording?

≥With HDD and DVD-RAM, you can, and the audio recorded also changes. Just press

[AUDIO].

≥With DVD-R, you cannot. Change before recording with “Select MTS” in the SETUP

menu.

I do not want TV Guide On ScreenTM

system to automatically appear on

screen.

≥Select “Off” in “Review options” menu, so that TV Guide On ScreenTM system appears

only when you press [TV GUIDE].

I do not want to use TV Guide On

ScreenTM system.

≥Set the unit with “Auto Channel Setting”. Note that you can set timer recording only

manually after you set the unit with “Auto Channel Setting”.

7392en.book 54 ページ２００４年４月２７日　火曜日　午後５時３０分