Panasonic DMR-E95H Troubleshooting guide

RQT7392

Reference

Troubleshooting guide

Recording/Timer recording/Transferring (dubbing) (Continued) Page

TV Guide On ScreenTM system

Play

Cannot transfer (dub) to a DVD-

R disc using the high speed

mode.

≥When recording to the HDD, set “DVD-R High-Speed Recording” to “On” in the SETUP

menu.

When transferring (dubbing), it

takes a long time even when

high speed mode is selected.

≥Use a disc that is compatible with high speed recording. Even if the disc is high speed

recording compatible, the maximum speed recording rating may not be possible due to the

condition of the disc.

≥It takes longer than normal to transfer (dub) many titles.

≥You cannot high speed transfer (dub) to DVD-R titles longer than 6 hours when using other

Panasonic DVD recorders that are not compatible with EP (8 hour) mode recording.

—

An unusually loud sound

coming from the rotating

DVD-R.

≥When recording or high speed transferring (dubbing) to a DVD-R, the sound of the disc

rotating may be louder than normal; however, this is not a problem.

—

The DV automatic recording

function does not work.

≥If images cannot be recorded or if the recording is aborted, check the connections and DV

equipment settings.

≥You cannot start recording until the images from the DV equipment appear on the television.

≥Recording may not be performed as desired if the time codes on the tape in the DV

equipment are not successive.

≥Depending on the equipment, the DV automatic recording may not operate properly.

—

Television program list does

not display when [TVGUIDE] is

pressed.

≥Leave the unit turned off over night.

≥Check the connection and set up the TV Guide On ScreenTM system again.

≥Consult your service provider if you are using a cable TV box.

≥Television program list is not available in your area. Set the unit using “Auto Channel Setting”.

Note that you can only set timer recording manually after you set the unit using “Auto

Channel Setting”.

—

7, 8, 10

—

“Cable code -INCOMPLETE-”

appears in the TV Guide On

ScreenTM system setup.

≥The unit cannot find the correct IR code for the cable TV box. Consult your service provider. —

As soon as the unit is turned

on, and when you try to start

timer recording, the TV Guide

On ScreenTM system setup

begins.

≥Even if you do not want to use the TV Guide On ScreenTM system, you need to complete the

TV Guide On ScreenTM system setup (until [ENTER] is pressed after the “Watch TV”

message screen is displayed). It will not be displayed after this point.

Several days of television

program listings are blank.

≥Immediately after beginning use there are several days of blank listings. You can display

program listings up to 8 days forward without any blank listings by downloading program lists

continuously over several days.

—

Channel changes even when

no operation is performed.

≥When the unit is connected to a cable TV box, the cable TV box channel changes while the

unit is turned off in order to download the television program list.

—

Play fails to start even when

[1] (PLAY) is pressed.

Play starts but then stops

immediately.

≥Insert the disc correctly with the label facing up.

≥You tried to play a blank DVD-RAM/DVD-R, or disc unplayable on this unit.

≥You may be able to transfer (dub) a “One time only recording” title that was recorded to DVD-

RAM using a different Panasonic DVD Recorder to this unit’s HDD, but play is not possible

due to copyright protection.

≥When recording to DVD-RAM using EP (8H) mode, play may not be possible on DVD players

that are compatible with DVD-RAM. In this case use EP (6H) mode.

≥You cannot play discs during DV automatic recording.

—

Audio and video momentarily

pause.

≥This occurs between play list chapters.

≥This occurs between chapters and with partially deleted titles on finalized DVD-R that have

been transferred (dubbed) using the high speed mode.

—

DVD-Video is not played. ≥Some DVD-Video cannot be played when you change the ratings level. 48

Alternative soundtrack and

subtitles cannot be selected.

≥The languages are not recorded on the disc.

≥You may have to use the disc’s menus to select languages.

—

No subtitles. ≥When progressive output is on, closed captions cannot be displayed.

≥Subtitles are not recorded on the disc.

≥Turn the subtitles on.

—

Angle cannot be changed. ≥Angles can only be changed during scenes where different angles are recorded. —

You have forgotten your ratings

password.

≥While the disc tray is open, press [DVD] then press and hold [D] and [E] on

the main unit at the same time for 5 or more seconds.

—

Quick View does not work. ≥This does not work if the setting is “Off” in “Search Audio & PLAY k1.3”.

≥This does not work when audio is other than Dolby Digital.

≥This does not work when recording is in XP or FR mode. [RAM]

—

The resume play function does

not work.

≥This function only works when “PLAY” is flashing on the unit display.

≥Memorized positions are canceled when the unit is turned off or when the tray is opened. The

memorized position on the play list is also canceled when the play list and title are edited.

—

7392en.book 58 ページ２００４年４月２７日　火曜日　午後５時３０分