59
RQT7392
Reference
Edit Page
Still pictures
1. Damage requiring service—The unit should be serviced by qualified service personnel if:
(a)The AC power supply cord or AC adaptor has been damaged; or
(b)Objects or liquids have gotten into the unit; or
(c)The unit has been exposed to rain; or
(d)The unit does not operate nor mally or exhibits a marked change in performance; or
(e)The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing t o authorized
servicing personnel.
3. Replacement parts—When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.
For product information or assistance with product operation:
Refer to “Customer Services Directory” on page 61.
Cannot format. ≥The disc is dirty. Use a special cleaner and wipe clean.
≥You tried formatting a disc that is not compatible with this unit.
60
14
Cannot create chapters.
Cannot mark the start point or
the end point during “Shorten”
operation.
≥The unit writes the chapter division information to the disc when you turn it off or remove the
disc. The information is not written if there is an interruption to the power before this.
≥These operations are not possible with still pictures.
≥You cannot set points if they are too close to each other. You cannot set an end point before a
start point.
—
—
—
Cannot erase chapters. ≥When the chapter is too short to erase, use “Combine Chapters” to make the chapter longer. 33
The available recording time
doesn’t increase even after
erasing recordings on the disc.
≥Available recording space on the DVD-R does not increase even after erasing previously
recorded titles.
—
Cannot create a play list. ≥You cannot select all the chapters at once in a title if the title also includes still pictures. Select
them individually.
—
Cannot display Direct
Navigator screen.
≥This screen cannot be displayed during recording or transfer (dubbing) or while the unit is
standing by for linked timer recording with external equipment.
—
Cannot edit or format a card. ≥Release the card’s protection setting. (With some cards, the “Write protection Off” message
sometimes appears on the screen even when protection has been set.)
44
The contents of the card
cannot be read.
≥The card format is not compatible with the unit. (The contents on the card may be
damaged.)
Format using FAT 12 or FAT 16 with other equipment or format the card with this unit.
≥The card contains a folder structure and/or file extensions that are not compatible with this
unit.
≥Turn off and then turn on the unit again.
15, 28
45
15
—
Transferring (dubbing),
erasing and setting protection
takes a long time.
≥When there are a lot of folders and files, it may sometimes take a few hours.
≥When repeating transferring (dubbing) or erasing, it may sometimes take a long time.
Format the disc or card.
—
45
The PC card cannot be
removed.
≥Make sure the PC card is slotted home firmly before attempting to remove. 28
Timer recording began in the
middle of editing a still
picture.
≥If it comes to the time scheduled for timer recording, the recording may start even though
you are editing.
—
Product Service

Product information

7392en.book 59 ページ ２００４年４月２７日　火曜日　午後５時３０分