Panasonic DMR-EH57, DMR-EH67 Press 3, 4 to select Auto-Setup Restart and press OK, TV System

Press [3, 4] to select “Setup” and press [OK].

Press [3, 4] to select “Connection” and press [1].

Changing the unit’s settings

Refer to the control reference on page 60.

Auto-Setup Restart

You can restart auto channel setting if set up (➡ 19) fails for some reason.

After performing steps 1–4 (➡ 65)

5 Press [3, 4] to select “Auto-Setup

Restart” and press [OK].

The confirmation screen appears.

6 Press [2, 1] to select “Yes” and press [OK].

[For]Australia]and]N.Z.]

≥If the country setting menu appears on the television Press [3, 4] to select the country and press [OK].

You can also use the following method to restart Auto-Setup. When the unit is on and stopped,

Press and hold [X CH] and [CH W] on the main unit until the country setting screen§ or the Auto-Setup screen appears.

All the settings except for the ratings level, ratings password and clock settings return to the factory preset. The timer recording programmes are also cancelled.

§Only for Australia and N.Z.

To return to the previous screen

Press [RETURN].

To exit the screen

Press [EXIT].

List of TV Reception Channels [For]Asia]

	Tuner			Channel		VHF		UHF			CATV
	System			Coverage
											S01–S05
	PAL–BGH,			CCIR		E2–E12		E21–E69			M1–M10
	SECAM–BG										U1–U10
											S21–S41
	PAL–I			Hong		—		21–69			—
				Kong
	PAL–DK,			OIRT		R1–R12		21–69			44 MHz to
	SECAM–DKK1										470 MHz
	PAL–D			China		1–12		13–57			Z1–Z35
	[For]Australia]and]N.Z.]
	Tuner	Channel			VHF		UHF				CATV
	System	Coverage
	PAL–B		Australia		0–12		28–69		45 MHz to
										470 MHz
	PAL–BG			New	1–11		21–69		44 MHz to
			Zealand							470 MHz
	[For]Middle]East]
	Tuner			Channel		VHF		UHF			CATV
	System			Coverage
											S01–S05
	PAL–BGH,			CCIR	E2–E12			E21–E69			M1–M10
	SECAM–BG										U1–U10
											S21–S41
	PAL–I			South		4–13		21–69			—
				Africa
	PAL–DK,										44 MHz to
	SECAM–			OIRT	R1–R12			21–69
											470 MHz
	DKK1
RQT8906

TV System

Change the setting to match the equipment you are connecting with, or to match the title when there are both PAL and NTSC titles on the HDD.

1 While stopped

Press [FUNCTION MENU].

2 Press [3, 4] to select “To Others” and press [OK].

3

4

5 Press [3, 4] to select “TV System” and press [OK].

Setup	TV System
	PAL
Tuning	NTSC
Disc
Picture
Sound
Display	SELECT
Connection	OK
Others	RETURN

6 Press [3, 4] to select the TV system and press [OK].

≥PAL (factory preset)

–Select when connecting to a PAL or Multi-system television. Titles recorded using NTSC are played as PAL 60.

–Select to record television programmes and PAL input from other equipment.

–[HDD]Select when playing a PAL input title recorded on the HDD.

≥NTSC

–Select when connecting to a NTSC television. Television programmes cannot be recorded properly.

–Select to record NTSC input from other equipment.

–[HDD]Select when playing a NTSC input title recorded on the HDD.

7 Press [2, 1] to select “Yes” and press [OK].

To return to the previous screen

Press [RETURN].

To exit the screen

Press [EXIT].

∫To change the setting all at once (PAL!#NTSC)

While stopped, keep pressing [∫] and [< OPEN/CLOSE] on the main unit simultaneously for 5 or more seconds.

[Note]

≥This unit cannot record NTSC signals to discs that already have PAL signal recordings. (However, both types of programmes can be recorded onto the HDD.)

66