On the unit’s display, Messages | Panasonic DMR-EH67, DMR-EH57

On the unit’s display

The following messages or service numbers appear on the unit’s display when something unusual is detected during startup and use.

				Page
DVD 	≥The remote control and main unit are using different codes. Change the code on the remote control.			21
(“∑” stands for a number.)			Press and hold [OK] and the indicated number button at the same time for more

			than 5 seconds.

HARD ERR§	≥If there is no change after turning the unit on and off, consult the dealer where the unit was purchased.			—
NoERAS	≥You cannot delete items on this disc.			—
		The disc may be damaged. Use a new disc.

NoREAD	≥The disc is dirty or badly scratched. The unit cannot record, play, or edit.			10
	≥This message may appear when the DVD lens cleaner has finished cleaning.			10
		Press [< OPEN/CLOSE] on the main unit to eject the disc.

NoWRIT	≥You cannot write to this disc.			—
		The disc may be damaged. Use a new disc.

PLEASE WAIT§	≥There was a power failure or the AC plug was disconnected while the unit was on. The unit is carrying			—
		out its recovery process. This process restores the unit to normal operation. The unit is not broken.
		Wait until the message disappears.

PROG FULL§	≥There are already 32 timer programmes. Delete unnecessary timer programmes.			29
SP 35:50	≥Available space on the HDD or disc.			—
LP 151h		The example “SP 35:50” is displayed when less than 100 hours are available and the example “LP
“SP”, “LP” and the numbers		151h” is displayed when over 100 hours are available.
are examples.		“SP” and “LP” are recording modes, “35:50” means “35 hours 50 minutes” and “151h” means “151
		hours”.

UNFORMAT§	≥You inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R, +R DL or DVD-RW (DVD-			56
		Video format) that has been recorded on other equipment.
		Format the disc to use it.
		However all the recorded contents on the disc are deleted.

UNSUPPORT§	≥You have inserted a disc the unit cannot play or record on.			4–6
F74	≥The HDMI connection could not be authenticated due to a transfer malfunction.			—
		Consult the dealer where the unit was purchased.

F75	≥The HDMI connection could not be authenticated due to an internal data malfunction.			—
		Consult the dealer where the unit was purchased.

U59	≥The unit is hot.			—
		The unit switches to standby for safety reasons. Wait for about 30 minutes until the message
		disappears.
		Select a position with good ventilation when installing the unit. Do not block the cooling fan on the rear
		of the unit.

U61	≥(When a disc is not inserted) Displays when a malfunction has occurred during recording, playback or			—
		copy. This is displayed when the unit is in the recovery process to return to normal operation; it is not
		broken. Once the display disappears you can use the unit again.

U72	≥The HDMI connection acts unusually.			—
U73		–The connected equipment is not HDMI compatible.
		–The HDMI cable is too long. Please use a cable 5.0 meters or less.
		–The HDMI cable is damaged.

U76	≥HDMI cannot be output because you are connected to a model that does not support copyright			—
		protection.

U80	≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby mode. Now			—
U81		press [Í/I] on the main unit again to turn the unit on.
U99

U88	≥(When a disc is inserted) Displays when there was something unusual detected with the disc while			71
		recording, playback or copy. This is displayed when the unit is in the recovery process to return to
		normal operation; it is not broken. Once the display disappears you can use the unit again.

H or F	≥There is something unusual. (The service number displayed after H and F depends on the unit’s			—
		condition.)		71–76
	≥Check the unit using the troubleshooting guide. If the service number does not disappear, do the			71–76
		following.
		1. Disconnect the plug from the household mains socket, wait a few seconds, then reconnect it.
		2. Press [Í/I] to turn the power on. (The unit may be fixed.)
		If the service number does not disappear despite after doing the above, request service from the
		dealer. Inform the dealer of the service number when requesting service.

X HOLD	≥The Child Lock function is activated.			59
		Press and hold [OK] and [RETURN] simultaneously until “X HOLD” disappears.

§The message are alternately displayed.

Messages

RQT8906

69

Image 69

Panasonic DMR-EH67, DMR-EH57 operating instructions On the unit’s display, Messages

Contents

Model No. DMR-EH57 RQT8906-LExample How to replace the fuse If you see this symbolFor Saudi Arabia Before use Table of contents HDD and discs you can use for recording and play HDD, disc and card informationDVD Video Recording format DVD-Video format Recording modes and approximate recording times HDD, disc and card informationDVD-R DL +R DL Play-only discs 12 cm/8 cm Discs that cannot be playedHDD, disc and card information Suitable SD Cards Cards you can use on this unit EH67Structure of folders displayed by this unit EH67 DVD-RAM Important notes for recording HDD Hard disk drive handling care Disk drive handling careImportant notes for recording/HDD Hard Unit care Disc and card handling Remote control information Included accessoriesBatteries Use Control reference guide Remote controlAustraliaandN.Z Turn the unit on Unit’s display Main unitControl reference guide Opening the front panel When the unit is not to be used for a long time Connecting a televisionMake sure to use the pair of supplied RF coaxial cables Read AC Mains Lead on Before Connection Connecting a television and VCR ReadAC Mains Lead on Before Connection Connecting a stereo amplifier Connecting an amplifier with a digital input TerminalOther connections Connection Power off link Power on linkViera Link Hdavi Control TM Easy playback Easy control only with Viera remote control Press OK when you have finished Press 3, 4 to change the settingSettings Press 2, 1 to select the item you Want to change Television operation To enjoy progressive video Test by turning on the television and changing channels Press 3, 4 to select Setup Press OKPress 3, 4 to select To Others Press Function Menu Press OK Press 3, 4 to select Others Recording mode XP, SP, LP or EP Press REC Mode to selectPress W X CH to select the channel Press ¥ REC to start recording Recording television programmes Disc Insertion/EjectionTo finalise the disc To open the tray without disc finalisation To specify a time to stop recording- One Touch Recording Recording settings for High Speed CopyRecording television programmes Press ¥ REC on the main unit to select the recording time Press F Rec Flexible RecordingPress 3, 4, 2, 1 to select Start and press OK Playing while you are recording Using G-CODEsystem to make timer recordings Timer recordingPress G-Code Press the numbered buttons to enter the G-CODEnumber Manually programming timer recordings Timer recordingPress PROG/CHECK Timer recording To cancel recording when recording has already begunPress Drive Select to select the recording drive and press Press 2, 1 to select Stop Recording and press OK Check, change or delete a programme Relief RecordingAuto Renewal Recording Playing recorded video contents/Playing play-only discs Quick View Operations during play Manual Skip Changing audio during playPress Audio Playing DivX discs, MP3 discs and still pictures Jpeg Contents/Playing play-onlyRegarding DivX discs, MP3 discs and still pictures Jpeg Discs/Playing DivX discs, MP3 discs and still pictures Jpeg Press Direct Navigator Playing DivX discsPress 3, 4 to select the title and press OK Selecting file type to play Press 3, 4 to select the track and press OK Playing MP3 discsPlaying DivX discs, MP3 Press 3, 4, 2, 1 to select a group and press OK Press 3, 4, 2, 1 to select the album and press OK Playing still picturesPress 3, 4, 2, 1 to select the still picture and press OK Press Drive Select to select the HDD, DVD or SD drive Useful functions during still picture play Slide Show SettingStart Slide Show Slide Interval Using on-screen menus Using on-screen menus/Status messageCommon procedures Disc menu-Setting the disc content Press Status Status messages Editing titles/chapters Press 3, 4, 2Editing titles/chapters and playing chapters Cancel Protection § Set up Protection §Title operations Partial Delete Press 2, 1 to select the source title and press Creating, editing and playing playlistsCreating playlists Press Return Playlist operations Editing and playing playlists/chaptersAdd Chapter Move To edit the album Editing still pictures EH67To edit still picture Useful functions during still picture Album and picture operation Cancel Protection § Press 2, 1 to select Yes and press OKPress 2, 1 to select Delete and press OK Add Pictures Press 3, 4, 2, 1 to select the title and press OK Delete NavigatorDeleting titles or pictures during play Press Delete ¢ Copying titles or playlists Approximate copying times Max. speedDelete Navigator/Copying titles or playlists Copy Speed and recording mode when copyingCopying titles or playlists To stop copying Copying using the copying list- Advanced Copy Recording and playing while copying To return to the previous screenTo edit the copying list Copy Navigator/Copying list icons and functions Set Copy Time Setting the unit to copy according to the set timeCopying SD Video from an SD Card EH67 VIDEO§ HDD DVD-RAM Copying still pictures EH67 Copying using the copying listRegister still pictures for copy To register individual still pictures Press 3, 4 to select Copy All Copying all the still pictures on a card- Copy All PicturesPress 3, 4 to select To Others Press OK Pictures and press OK Start play on the other equipment Copying from a video cassette recorderPress REC DV automatic recording DV Auto Rec Common procedures Setting the protectionHDD, disc and card management Press OK Deleting all titles and playlists-Delete all titles Deleting all the contents of a disc or card-Format Enabling discs to be played on other equipment-Finalise Selecting the background style-Top MenuCreating Top Menu-Create Top Menu Press 3, 4 to select Create Top Menu and press OK Show Enter Name screen Entering textPress 3, 4, 2, 1 to select a character and press OK Press Set Child Lock Function Menu windowPress 3, 4 to select an item and press OK Lock OPEN/CLOSE Changing the unit’s settingsExit Function Tabs Menus Summary of settings Changing the unit’s settingsTabs Menus Options Underlined items are the factory presets Sound Changing the unit’s settingsDTS Mpeg On-Screen Messages Hdmi Settings§Grey Background FL Display Default Settings Clock Power SaveQuick Start Country Press 3, 4 to select Tuning and press TuningPress 3, 4 to select Manual Tuning and press OK Unit’s settings To change the setting all at once PAL!#NTSC Press 3, 4 to select Auto-Setup Restart and press OKRefer to the control reference on Auto-Setup Restart TV System Clock Settings Press OK when you have finished the settingsClock starts On the television Messages Messages On the unit’s display Frequently asked questions Set upCover Troubleshooting guide Troubleshooting guide Troubleshooting guide Timer recording does not stop Recording, timer recording and copying Cannot recordEven when is pressed When copying, it takes a long You want to cancel the ratings PasswordPlay Play fails to start even when Play is pressed To reset this unit To return all the settings other Copying, deleting and settingPreset To reset the ratings level Troubleshooting guide/Glossary GlossaryRGB Specifications Safety precautions Web Site http//panasonic.net RQT8906-L Index