Panasonic DMR-EX75, DMR-EX85 manual Press 3, 4 to select Manual and press Enter, Press 3, 4, 2

Changing the unit’s settings

Refer to the control reference on page 60.

Manual

You can delete analogue channels and set the analogue channel details.

After performing steps 1–4 (➡ 65)

5 Press [3, 4] to select “Manual” and press [ENTER].

Manual Tuning

		Pos	Name		Ch	Pos Name Ch
		1		ARD	10	11
		2		ZDF	2	12
		3		N3	28	13
		4				14
		5				15
		6				16
SELECT		7		HR3	7	17
ENTER		8				18
	RETURN	9		BR3	9	19
Delete		10				20

To delete a programme position

Press [3, 4, 2, 1] to select a programme position and press the “Red” button.

∫To change the tuning settings for individual programme position

6	Press [3, 4, 2, 1]	Manual	Name	ARD
			Pos	1
	to select a	Tuning	Channel	4
			Fine Tuning	Auto
	programme position		Mono	Off
		SELECT
	and press [ENTER].
		RETURN
			RETURN : leave

Press [3, 4] to select an item and press [1].

Pos	Programme position in the table
	(You cannot change the programme position.)
Name	To enter or change the name of a TV station
	Press [3, 4, 2, 1] to enter station name and
	press [ENTER].
	If the station name needs a blank space, select
	the blank between “Z” and “¢”.
Channel	To enter newly available TV stations or change
	the channel number of an already tuned TV
	station
	Press [3, 4] or the numbered buttons to enter
	the channel number of the desired TV station.
	Wait a few moments until the desired TV station
	has been tuned.
	After the desired TV station is tuned, press
	[ENTER].
Fine Tuning	To obtain the best tuning condition
	Press [3, 4] to adjust the best tuning condition
	and press [ENTER].
	≥Press [1] to return to “Auto”.
Mono	To select the type of sound to be recorded
	Press [3, 4] to select “On” if the stereo sound is
	distorted due to inferior reception conditions, or if
	you want to record the normal (mono) sound
	during a stereo or bilingual broadcast, and press
	[ENTER].

RQT8388

Auto-Setup Restart

You can restart auto channel setting for terrestrial digital and analogue channels if set up (➡ 18) fails for some reason.

However, if you perform “Auto-Setup Restart”, the order of analogue channels will change.

After performing steps 1–4 (➡ 65)

5 Press [3, 4] to select “Auto-Setup

Restart” and press [ENTER].

The confirmation screen appears.

6 Press [2, 1] to select “Yes” and press [ENTER].

You can also use the following method to restart Auto-Setup. When the unit is on and stopped

Press and hold [X CH] and [CH W] on the main unit until the

Auto-Setup screen appears.

All the settings except for the ratings level, ratings password and time settings return to the factory preset. The timer recording programmes are also cancelled.

To return to the previous screen

Press [RETURN].

To exit the screen

Press [RETURN] several times.

List of TV Reception Channels

Tuner	Channel	VHF	UHF	CATV
System	Coverage
PAL–B	Australia	0–12	27–69	45 MHz to
	Analogue			470 MHz
DVB–T	Australia	6–12	27–69	–
	Digital

66