Panasonic DMR-EX85 Check, change or delete a programme, Relief Recording, Auto Renewal Recording

Check, change or delete a programme

≥Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].

Press [PROG/CHECK].

Icons

FTimer recording standby is activated. [ This programme is currently recording.

W The times overlap those in another programme. Recording of the programme with the later start time starts when the earlier programme finishes recording.

l You stopped a weekly or daily timer recording. The icon disappears the next time the timer programme starts

recording.

FThe disc was full so the programme failed to record.

	The material was copy-protected so it was not
	recorded.
X	The programme did not complete recording because
	the disc is dirty or some other reason.
	Timer programmes set to Auto Renewal Recording
	(➡ right column).
	Titles that have been rerouted to the HDD
	(Displayed while recording.)
HDD Recording drive is set to HDD
DVD	Recording drive is set to DVD
		Timer		Remain	HDD	30:24 SP		DVD	1:58 SP
		Recording				12:56:00			15. 7. TUE
			No. Name	Date	Start		HDD	Mode		Drive
						Stop DVD				space
				New Timer Programme

Press ENTER to store new programme.

ENTER

RETURN

Message displayed in the “Drive space” line

OK: Displayed if the recording can fit in the remaining space.

>(Date): For recordings made daily or weekly, the display will show until when recordings can be made (up to a maximum of one month from the present time) based on the time remaining on the disc.

!: It may not be possible to record because: ≥there is not enough space left

≥the number of possible titles has reached its maximum.

Relief: Timer programmes that will be relief recorded to the HDD.

Relief Recording

When the recording drive is “DVD” and there is not enough remaining space, recording automatically switches to the “HDD”. If there is no disc in the tray or the disc cannot be recorded on or when timer recording starts while copying, the recording drive will be altered to the HDD.

≥The Direct Navigator shows which programmes were relief-

recorded (“ ” is displayed.) (➡ 30).

≥If the time remaining on the HDD is insufficient, as much of the programme as possible will be recorded onto the HDD.

Auto Renewal Recording

[HDD]

If you record a programme onto HDD repeatedly everyday or every week using timer recording, the unit will record the new programme over the old one.

This function can be used only when weekly recording or daily recording is selected.

1 Press [PROG/CHECK].

2 Press [3, 4] to select the programme and press [ENTER].

3 Press [2, 1] to select “RENEW” column.

4 Press [3, 4] to select “ON” and press

[ENTER].
Timer	Remain		HDD	30:24 SP		DVD	1:58 SP
Recording						12:54:00	15. 7. TUE
Name	Date	Start	Stop		HDD	Mode	RENEW
					DVD
1 ARD	SUN	22:00	22:30		HDD	SP	ON
						Programme Name

[Note]

≥If a programme set for Auto Renewal Recording is protected or while play back is taking place from the HDD, or while copying, the programme will not be overwritten. Instead the programme set for recording will be saved as a separate programme, and this programme will be the one to be overwritten when the next Auto Renewal Recording takes place.

≥Playlists made from programmes that were set for Auto Renewal Recording are deleted along with auto renewal.

≥When there is not enough space on the HDD, the programme may not be recorded completely.

Timer recording

∫To change a programme

Press [3, 4] to select the programme and press [ENTER]. (➡ 27, step 3)

∫To delete a programme

Press [3, 4] to select the programme and press [¢].

You can also delete a programme with the following steps

1Press [3, 4] to select the programme and press [SUB MENU].

2Press [3, 4] to select “Delete” and press [ENTER].

∫To exit the timer recording list

Press [PROG/CHECK].

Programmes that failed to record are deleted from the timer recording list at 4 a.m. two days later.

RQT8388

29