Manuals / Panasonic / Computer Equipment / All in One Printer

Panasonic DP-2500 manual Handling, Toner and Paper Ventilation

Models: DP-2500

1 73

Download 73 pages 27.73 Kb

Page 8

Image 8

Precautions

Handling

■Do not look directly at the exposure lamp when copying.

■Do not turn the power switch off or open the front panel during copying.

CDo not drop paper clips or other metal objects into

the copier.

Toner and Paper

Ventilation

■Store toner, drum and paper in cool areas with low humidity.

CHigh quality paper of 16 lbs - 24 lbs (15 – 34 lbs via sheet bypass) may be used.

CFor optimum performance, it is recommended that only Panasonic Brand supplies are used in the copier.

■The copier should be installed in a well-ventilated area to minimize the ozone density in the air.

Page 8

Image 8

Panasonic DP-2500 manual Handling, Toner and Paper Ventilation

Contents

DP-2500/3000 EnglishOperation Chart Common Features and UsageTouch Panel Display Function CategoriesEnergy Star Table of Contents Others Problem SolvingOptions Laser Safety PrecautionsFor Your Safety Handling Toner and Paper VentilationInstallation FCC Warning For U.S.AControl Panel Starting DisplayContents Refer to Touch Panel Display IndicationsBasic Menu Full Size CopyingSelect the Copy Copying with Preset RatiosReduction or Enlargement Copying Using the Sheet Bypass $Adjust the side guidesCopying on Special Paper, etc # Place approximately 50 sheets of paper into the traySided/Original H Copy Sided/Orig. H Copy KeyTouch 1 \ Procedure\ 2/2 \ 1/2 \ 2 Copy On the Platen Mode and Copy Book \ 2 CopyPlace the Original Select Book \ FormatCopy Place TouchOriginals ModeTouch N in 1 Mode 1 CopyMake Selection 1 CopyBooklet Copy Touch BookletMode Booklet CopySadf Mode Sadf Single Sheet Automatic Document Feeder FunctionPlace the Original Select One at a Time Function Csadf function cannot be combined with 2 \ 1 and 2 \Zoom/Effects Zoom/Effects KeySelect Zoom Zoom CopyingZoom Numbering FeatureNumbering Margin or Book Margin/Book/EdgeSelect Edge Insertion/Overlay Insertion/Overlay KeyInterleaving Mode OHP InterleavingOHP Interleaving Blank Paper Copied PaperOverlay Mode OverlayOverlay 1st-pageOverlay To recall a job stored in memory Job MemoryTo store a job in memory Other Features Energy Saver ModeSleep Mode Interrupt ModeManual Skyshot Mode/Digital Skyshot Mode Setting the Digital Skyshot Mode# Touch the Copier Settings key Touch the 06 Digital Skyshot keySetting the Manual Skyshot Mode Changing the default M1/M2 size See# Select the Copier Settings in Function Setting mode Touch the 09 KEY Operator Mode keyCombined Function Table Using Function Modes to Change the Initial Copy Modes Function Key Reset KeyFunction OptionsModes Function Initial Setting General FunctionsCopier Settings Screen Modes Function Initial SettingInput the Key Operator ID Code to Change Settings General Functions for Key OperatorORIG. SET Beep Copier Settings for Key Operator 10 MAX. Copy Setting Function Setting Changing the Auto Exposure Setting#Touch Copier Settings Proceed as FollowsFunction Setting for Key Operator Select 09 KEY Operator Mode keyChanging the Paper Size #Touch General FunctionsPaper Guide a Stopper Guide b # Select General Functions KEY Operator Mode keyDepartmental Counter Maximum Number of Copies Exit function modeChange the Department Counter Number, ID Code and limit Accessories ComponentsFeatures Automatic Document FeederADF DA-AS200/i-ADF DA-AR250 ComponentsOriginal OperationPlace Finisher Mode Finisher/Exit Guide UnitDA-FS200 Finisher Platen Face-UpPull out the tape Reinstall the Staple Cartridge #Open the Staple Cover Sheet Paper Tray Problem SolvingAdding Paper J Replacing the Toner Cartridge and Waste Toner Box ? Open the Front CoverSlowly pull the Waste Toner Box Straight outInstall the new Toner Cartridge Install a new Waste Toner BoxShake the new Toner Cartridge WellRemoving a Misfed Paper Paper Misfeed Locations FinisherCopier Paper Feed UnitFinisher Paper Transport Area Push the latch to open the coverRemove the misfed paper Close the cover by pushingPaper Entry Area Open the Right CoverAutomatic Duplex Unit ADU Close the Right CoverSystem Console ADF/i-ADF #Lift up the ADF Input Tray Troubleshooting Before Calling ServiceCheck ActionAs a rule, clean weekly Light CopiesMarked Copies Platen CoverReplacing the Battery Specifications DP-2500/3000 CopierADF DA-AS200, i-ADF DA-AR250 Bin Finisher DA-FS2003rd/4th Paper Feed Module DA-DS200/205/210/215 DA-AS200 DA-AR250Options and Supplies Part Name RemarksFor Fax For PrinterWarranty