3 Chapter
Chapter 3 | Other Features |
Making Copies with the ADF Opened | |
|
The original can be copied without generating dark borders even if the ADF is opened.
Digital Skyshot Mode
The Digital Skyshot mode can be selected in the standard settings.
zWhen “2 Page” or “N in 1” is selected, only “Normal” can be set in the Digital Skyshot mode.
Other
zIf there is a white margin less than 5 mm around the original, the edge of the copy may come out abnormal (white lines/streaks). To avoid the problem, change the setting of “Digital Skyshot Mode” to “No”. For setting of “Digital Skyshot Mode”, refer to Copier Settings in the Operating Instructions (For Function Parameters) of provided
Features
1
2
3
Open the ADF more than 45 degrees,
and place original on the Platen Glass, and then leave the ADF open.
Face down. Align with top left corner.
zRefer to Placing Originals (see page 6).
Press the Copy key if the machine is set to other function mode.
Select copy features if necessary.
5 Press the Start key.
zPlace the next original, and then follow the instructions described on the Touch Panel Display.
zAfter finishing copying, press the Reset key to return to the initial screen of the currently active mode.
104
4 Enter the desired number of copies.