Copying 1-Sided Originals onto 2-Sided Sheets

Two 1-sided originals can be copied onto one 2-sided sheet. The 1st original’s image is copied onto the front side and the 2nd original’s image is copied onto the back side of the sheet.

1 Select 2-Sided / Original->Copy”,

3 Select the bind position, and then

 

and then select “1 -> 2”.

select “OK”.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

zTo display this screen, refer to steps 1 to 3 of

 

 

 

 

Long Edge:

 

 

 

 

 

 

Basic Operation for the 2-Sided Copy

 

 

 

 

Copies both sides of

 

Mode (see page 42).

 

 

 

 

original aligning to the long

2 Select the Orientation of the original.

 

 

 

 

edge of the original.

 

 

 

 

 

 

 

 

 

Short Edge:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Copies both sides of

 

 

 

 

 

 

 

 

 

 

 

original aligning to the short

 

 

 

 

 

 

 

 

 

 

 

edge of the original.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

zWhen setting “Edge” or “Margin” in the 2-

 

 

 

 

 

 

 

 

Sided copy mode, the printing position may

 

 

 

 

 

 

 

 

differ on each side of the paper. Refer to

 

 

 

 

 

 

 

 

Effect Modes (see page 68).

 

 

 

 

 

 

 

 

zFor the following procedure, refer to steps 5

 

 

 

 

 

 

 

 

to 6 of Basic Operation for the 2-Sided

 

 

 

 

 

 

 

 

Copy Mode (see page 42).

 

 

 

 

 

 

Select for the original in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

portrait orientation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select for the original in

 

 

 

 

 

 

 

 

 

 

 

landscape orientation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Features Menus More 2 Chapter

43