Features Menus More 2 Chapter

68

Effect Modes

Setting a Blank Edge

Unnecessary edge can be erased by setting a blank edge.

zWhen “Zoom” is selected, the erasing width varies depending on the zoom ratio.

1

Place original(s).

5 Select “XY” to set the same value for X

 

zRefer to Placing Originals (see page 6).

and Y, or “X” or “Y” to set a different

2

Press the Copy key if the machine is

value for X and Y.

 

 

 

3

set to other function mode.

 

 

 

 

 

 

Select “More Menus”.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

XY

Select to set the same erasing width

 

 

 

 

 

 

 

 

 

 

for all sides.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

X

Select to set the erasing width for the

 

 

 

 

 

 

 

 

 

 

right and left sides.

 

 

 

 

 

 

 

 

 

 

 

4

Select “Zoom / Effects”, and then

Y

Select to set the erasing width for the

 

top and bottom sides.

 

select “Edge”.