Printing

Printing from SD Memory Card / PC

40
Printing images directly from the SD Memory Card
●Be sure to use only Genuine SD Memory Card (up to 1GB).
●The image data saved on the SD Memory Card, or the PCMCIA/PC Card cannot be printed if the Function Parameter
"84 SD/PC Card Function" (General Settings > Key Operator) is set to "No".
For more details on this setting, refer to General Settings in the Operating Instructions (For Function Parameters) on
the provided CD-ROM.
ATTENTION
SD Memory Card,
or PCMCIA/PC
Card Adapter
Individual
●JPEG format only
File List
●JPEG
●TIFF (black & white)
●PDF (when installing optional Printer
Controller Module)
When using the machine as Printer, installation of Printer Driver is necessary.
For installation, refer to Printer Driver in the Operating Instructions (For Setting Up) of provided booklet.
For configuration of Printer Driver, refer to Configuring the Printer Driver Settings in the Document Management System
(PCL Printer Driver) on provided CD-ROM.
Printing from PC
Thumbnail
Index
Print
●Any commercial Genuine SD Memory Card (up to 1 GB) can be used.
●For acceptable memory card for PCMCIA/PC Card Adapter (Type II, 3.3V Operating Voltage Only), refer to the
PCMCIA/PC Card Adapter's manual.
●When the printing result differs from the actual photograph image, set the Printer Setting "27 Auto Contrast Mode"
to ON and the machine will automatically adjust the print quality (The initial setting of this function is OFF). However,
the level of improvement will vary with each photograph since the adjustment is done automatically by the machine.
For details, please refer to the Operating Instructions (For Function Parameters) on the provided CD-ROM.
NOTE
Press the Print key if the machine is
set to other function mode.
1●When installing the Hard Disk Unit, the above
"Mail box" screen will be displayed. For
details about "Mail Box" and "Job Control",
refer to Print Operation (for Printer) in the
Document Management System (PCL Printer
Driver) on provided CD-ROM.
[Hard Disk Unit]
DP-C354/C264: Standard
DP-C323/C263/C213: Option
NOTE
●If the setting of Function Parameter "84 SD/PC
Card Function" (General Settings > Key
Operator) is set to "No", the Confirmation
screen displays an "Function not available"
error message and beeps.
●If you do not touch any key for 3 seconds, or
select "Close" on the touch panel display, the
machine will display the previous screen.
For more details, refer to General Settings in
the Operating Instructions (For Function
Parameters) on the provided CD-ROM.
Select "SD Print".
2