Replacing Consumables
92

Replacing the Battery

CAUTION
!
Remove the screw with a screwdriver.
1Pull out the Battery Holder.
2
THIS PRODUCT CONTAINS A LITHIUM BATTERY. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
IMPROPER USE OR REPLACEMENT MAY CAUSE OVERHEATING, RUPTURE OR EXPLOSION RESULTING IN
INJURY OR FIRE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS OF YOUR LOCAL
SOLID WASTE OFFICIALS AND LOCAL REGULATIONS.
Be sure to use the specified type of battery only.
Ensure that the battery is installed with correct polarity.

Notice: California only:

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material -
special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate

Replacing the Battery

The machine has an internal battery (Product No.: CR2032) which maintains the date and time.
When the battery requires replacement, the Status button changes from Gray to Yellow. (See page 63)
If the status indicates "Replace Battery", replace it by following the procedures below:
The service life of the battery is approximately 1 year under normal use.
Screw
Control Panel
Battery Holder
To facilitate removing the screw, adjust
the viewing angle of the Control Panel
to the Normal position. (See page 3)
Replace Battery