RQT7135
17
Progressive video Page
Sound incorrect
Recording
Unit displays
Television displays
§MPEG: [The\Middle\East,\South\Africa,\Russia,\Australia\and\N.Z.]
Pictures not in progressive
output.
≥
Select “Enable” in “Progressive Out (Component)” in the SETUP menu. Then, select
“480P” in the Picture menu.
≥
If the unit is connected to the television through VIDEO OUT, output will be interlace.
11, 12
–
Closed captions not
displayed.
≥
When progressive output is on, closed captions will not be displayed. 11
Sound distorted.
≥
Turn Advanced Surround off.
≥
Noise may occur when playing WMA files.
6
–
Piercing noise comes from
the speakers.
≥
If you have connected a digital amplifier which does not include decoder, be sure to
select “PCM” in “Dolby Digital”, “DTS Digital Surround” or “MPEG§” in the SETUP
menu.
13
Effects do not work.
≥
Dialogue Enhancer and Advanced Surround do not work when the unit is outputting
bitstream signals.
≥
Dialogue Enhancer and Advanced Surround do not work or have less effect with
some discs.
–
–
Cannot record to digital
recording equipment.
(Incorrect sound recorded.)
≥
You cannot record WMA/MP3.
≥
You cannot record DVDs that have protection preventing digital recording.
≥
You cannot record DVDs if the recording equipment cannot handle signals with a
sampling frequency of 48 kHz.
≥
Make the following settings:
–Advanced Surround: OFF
–PCM Down Conversion: Yes
–Dolby Digital/DTS Digital Surround/MPEG§:PCM
–
–
–
6
13
13
“noPLAy”
≥
You inserted a disc the unit cannot play; insert one it can.
≥
You inserted a blank disc.
3
–
“U11”
≥
Disc is dirty: Wipe it clean. 3
“U15”
≥
You inserted a DVD-R that has not been finalized. 3
“H∑∑”
∑∑ stands for a number.
≥
Trouble may have occurred. The number following “H” depends on the status of the
unit. Turn the unit off and then back to ON. Alternatively, turn the unit off, disconnect
the AC power supply cord, and then reconnect it.
≥
If the service numbers fail to clear, note the service number and contact a qualified
service person.
–
–
“nodISC”
���
You haven’t inserted a disc: Insert one.
≥
You haven’t inserted the disc correctly: Insert it correctly.
–
5
“/”
≥
The operation is prohibited by the unit or disc. –
“Cannot display group xx,
picture xx”
≥
You are trying to display incompatible pictures. 9
“The progressive out is set
to “Disable””
≥
Select “Enable” in “Progressive Out (Component)” in the SETUP menu. 12
“This disc may not be played
in your region”
≥
You can only play DVD-Video if their region number is the same or includes the same
region number as the unit or if the DVD-Video is marked “ALL”. Confirm the region
number for the unit on the rear panel.
Cover
No on-screen display.
≥
Select “On” in “On-Screen Messages” in the SETUP menu. 13
On-screen display only
partially displayed.
≥
Press [DISPLAY], and press [
2
1
] to highlight the icon at the right end, then press
[
3
4
] to adjust the position.
10, 11
Troubleshooting guide
7135En.fm 17 ページ ２００３年７月１６日　水曜日　午後８時３４分