6
RQTC0118
STEP 1 Connection
≥Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.
≥Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.
≥Turn off all equipment before connection and read the appropriate operating instructions.
≥Connect the terminals of the same colour.
≥Unless otherwise indicated, illustrations are of the models for areas except the United Kingdom and Republic of Ireland.
([The\United\Kingdom\and\Republic\of\Ireland]:There is no S VIDEO OUT terminal on the unit.)
SCART (AV) INAUDIO IN
R L COMPONENT
VIDEO IN
AUDIO IN
R L
VIDEO
INS VIDEO
IN
Audio/video
cable§2
With VIDEO IN or S VIDEO IN
S video cable§1
With COMPONENT VIDEO IN
Video
cables
§1When using this connection, the audio cable (red
and white plugs) should also be connected.
§2[Australia\and\N.Z.]: included
\The\Middle\East,\South\Africa\and\Asia\
: included
[The\United\Kingdom\and\Republic\of\Ireland]
: not
included
You can connect the audio cable to the 2-
channel audio input terminals of an analog
amplifier or system component to enjoy
stereo sound.
Audio/video
cable§2
Not used
Television
Back of the unit
To enjoy progressive video
Connect to a progressive output compatible television.
1[The\United\Kingdom\and\Republic\of\Ireland]
Set “VIDEO OUT-SCART” to “VIDEO/YPbPr” for
component terminals. (➜16, “VIDEO” menu).
2 Set “VIDEO OUT (I/P)” to “PROGRESSIVE”, then
follow the instructions on the menu screen (➜16,
“VIDEO” menu).
[The\United\Kingdom\and\Republic\of\Ireland]
Panasonic televisions with 625 (576)/50i · 50p, 525
(480)/60i . 60p input terminals are progressive
compatible.
With SCART (AV) IN
21-pin SCART
cable
≥If the television is compatible with
S-video, set “VIDEO OUT-SCART”
to “S-VIDEO/YPbPr”, or compatible
with RGB, set “VIDEO OUT-
SCART” to “RGB/NO OUTPUT” for
the AV terminals (➜16, “VIDEO”
menu).
[The\United\Kingdom\and\Republic\of\Ireland]
or