Aluminum Electrolytic Capacitor/FA
Radial lead type | Discontinued | |
Series: FA Type : A | ||
|
■Features Endurance :105°C 2000 to 5000h Smaller than Series HFQ
Low impedance (20 to 40 less volume than Series HFQ)
■Specification
Operating Temp. Range |
|
|
|
| + 105°C |
|
| |||
Rated W.V. range |
|
|
|
| 6.3 | to | 63 V .DC | |||
Nominal cap. range |
|
|
|
| 68 to 15000 µ F |
|
| |||
Capacitance tol. |
|
|
|
| ±20 % (120Hz/+20°C) | |||||
DC leakage current | I < 0.01 CV (µ A) after 2 minutes application of rated working voltage at +20°C. | |||||||||
|
|
|
|
|
|
|
|
|
|
|
tan δ | W.V. | 6.3 | 10 | 16 | 25 | 35 |
| 50 | 63 | (max.) (120Hz /+20°C) |
tan δ | 0.22 | 0.19 | 0.16 | 0.14 | 0.12 | 0.10 | 0.08 | |||
Add 0.02 per 1000µF for products of 1000µF or more.
Characteristics | Impedance at | ||||
at Low Temperature | (Impedance ratio at 100kHz) |
|
| ||
| After following life test with DC voltage and +105 ±2°C ripple current value applied (The sum of | ||||
| DC and ripple peak voltage shall not exceed the rated working voltage),the capacitors shall meet | ||||
| the limits specified below. |
|
| ||
| Duration: 2000 hours (φ8), 3000 hours (φ10), 5000 hours (φ12.5 to φ18) Post test requirements at | ||||
Endurance | 20°C. |
|
|
| |
|
|
|
|
| |
| Capacitance change | < ±20% of | initial measured value |
| |
| tan δ | < 200% of | initial specified value |
| |
| DC leakage current | < initial specified value |
| ||
|
|
|
|
| |
Shelf life | After storage for 1000 hours at +105±2°C with no voltage applied and then being stabilized at | ||||
+20°C,capacitor shall meet the limits specified in “Enduramce”. | |||||
| |||||
■Explanation of Part Numbers
E E U
F
A
Product code | Series code | R.W.V. code | N.Capacitance code | Option |
■Dimensions in mm (not to scale)
Vinyl sleeve | φ10< | φ8> | (mm) |
| |||
| φd±0.05 |
|
|
Safety vent
L
L <16:L+1.0 max | 14 min | min |
L >20:L+2.0 max |
|
|
P± 0.5 | P± 0.5 |
φD+0.5 max | φD+0.5 max |
Body Dia. φD | 8 | 10 | 12.5 |
| 16 | 18 | |
Body Length L |
|
| < 25 |
| > 30 |
|
|
|
|
|
|
|
|
|
|
Lead Dia. φd | 0.6 | 0.6 | 0.6 |
| 0.8 | 0.8 | 0.8 |
Lead space P | 3.5 | 5 | 5 |
| 5 | 7.5 | 7.5 |
■Frequency correction factor for ripple current
W | (V.DC) | Cap.(µF) |
|
| Frequency(Hz) |
|
| ||||
|
|
|
|
| 60 | 120 |
| 1k | 10k | 100k |
|
|
| 6.8 to | 330 | 0.55 | 0.65 |
| 0.85 | 0.90 | 1.0 |
| |
6.3 | to 63 | 390 | to | 1000 | 0.70 | 0.75 |
| 0.90 | 0.95 | 1.0 |
|
1200 | to | 2200 | 0.75 | 0.80 |
| 0.90 | 0.95 | 1.0 |
| ||
|
|
|
| ||||||||
|
| 2700 | to 15000 | 0.80 | 0.85 |
| 0.95 | 1.00 | 1.0 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. |
|
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. | Mar. 2005 |
|
– EE23 –
