7
Do not use to trim the hair of a
pet.
•Failure to observe this may re-
sult in injuries to the skin.
3) Check that the blades are not
damaged or deformed before
use.
•Failure to observe this may re-
sult in injuries to the skin.
4) When using attachments, do so
in accordance with the instruc-
tions and set the height setting to
the maximum.
•Failure to observe this may re-
sult in the beard being trimmed
too much.

Important

1) When disconnecting the electric
cord from the wall socket, always
grip the electric plug and not the
electric cord.
•Failure to observe this may re-
sult in electric shocks or short
circuits.
2) Do not store or charge the trim-
mer in a place exposed to direct
sunlight or near a heater or other
source of heat.
•Failure to observe this may re-
sult in malfunctions or deforma-
tions.
3) Lubricate the trimmer before use.
•Failure to observe this may re-
sult in the blades becoming dull
or abnormal noises.
•Failure to observe this may re-
sult in the blades becoming hot
and the deterioration of cutting
performance.
4) Never allow charging to continue
for longer than 48 hours.
•Failure to observe this may re-
sult in shorting the life of the re-
chargeable battery.
5) The trimmer may become warm
during operation and/or charging.
This is normal.
6) Keep out of the reach of children.
7) Turn the switch off exchanging the
head.
8) Do not attempt to charge the trim-
mer at temperatures below 0°C
or above 40°C. Charging cannot
be done correctly under such
conditions.
This trimmer is indoor use only.
1Parts identification
ATrimmer head
BHead exchange button (Shaver
head is packed with ER216
only.)
CTrimming height adjustment
switch
DTrimming height attachment
EOil
FCleaning brush
GBlade
*Can be removed.
HBody
IOn/Off switch
JCharge status lamp
KElectric cord
LShaver head (ER216 only)
MProtective cap (ER216 only)
OS01L015_ER214-ER216_E 1/17/02, 4:43 PM7