17 |
|
| 18 |
|
19 |
|
| 20 |
|
|
| (c) |
| (h) |
|
| (a) | (g) | (k) |
| (f) | (d) |
| |
| (e) |
|
| |
|
|
|
| |
|
| (b) |
|
|
|
|
| (j) | (i) |
|
|
|
| |
21 |
| (n) | 22 |
|
|
|
| (q) | |
|
| (o) |
| |
|
|
|
| |
|
|
|
| (p) |
| (l) |
|
|
|
|
| (m) |
|
|
Before use
This Beard/Hair Trimmer is for the trimming and care of mustaches, beards and hair.Trimming length can be adjusted between 1 to 20 mm.The trimmer can be operated either from an AC power source or on its own rechargeable battery.
Parts identification
(see fig. 1)
ASwitch
Slide up to turn on, slide down to turn off.
BCharge Indicator Lamp
Lights when the unit is connected with the adaptor M to an AC power source for charging.
CMain Blade
A precision 39
DQuick Adjust Dial
Turn the dial to a higher setting to raise or lower the comb attach- ment F to the desired length (between 1 and 20 mm) (see fig. 2). The comb attachment is locked in position when the switch is set to “1”.
ETrimming Length Indicator
Indicator | Trimming Length |
1 | 1.0 mm (1/32˝) |
|
|
2 | 2.0 mm (5/64˝) |
|
|
• | 3.5 mm (5/32˝) |
|
|
5 | 5.0 mm (3/16˝) |
|
|
• | 6.5 mm (9/32˝) |
8 | 8.0 mm (5/16˝) |
•9.5 mm (3/8˝)
11 11.0 mm (13/32˝)
•12.5 mm (1/2˝)
14 14.0 mm (17/32˝)
•15.5 mm (5/8˝)
17 17.0 mm (21/32˝)
•18.5 mm (23/32˝)
20 20.0 mm (25/32˝)
•The actual hair length may be longer than the set trimming hight.
FComb Attachment for Hair
Use this to control the trimming length. (see fig. 3)
GMoving Blade
HStationary Blade
ICleaning Lever
Push this lever to remove bits of hair caught between the station- ary blade and the moving blade.
JBlade Block
Release to remove the blade block from the housing to clean or replace the blade. (see fig. 12)
6 |
7
