Cleaning with the self-cleaning recharger
1Preparing the self-cleaning recharger
Remove the shaver and the appliance plug from the
English
2
1
1 Remove the water tank and then open the water tank cap.
2 Wash away the old cleaning liquid and then rinse the water tank.
3 4
3 Pour tap water into the water tank.
•Do not let the water rise above the maximum water line. This may cause the cleaning liquid to spill.
4 Securely close the water tank cap and then attach the tank.
|
|
5 Peel off the seals | 6 Attach the detergent |
from the new | cartridge. |
detergent cartridge. |
|
(2 seals) |
|
•Hold the detergent cartridge horizontally. (The detergent may spill if the detergent cartridge is tilted too much.)
• Replace the HydraClean™ Shaving System Solution Cartridge when | away the detergent cartridge and the cleaning liquid. | ||||
| the status lamp is illuminated. Use the below chart as a guide. | • Only use | |||
| Shaving | Cleaning | Reusability |
| • Always change the detergent cartridge and the cleaning liquid in the |
|
|
|
|
| water tank at the same time. Adding water, or changing just the |
|
| 1 time/day | approx. |
| |
|
|
| detergent cartridge or the water, will result in deteriorated cleaning | ||
| 1 time/day | 1 time/3 days | approx. |
| |
|
| functions. | |||
|
| 1 time/week | approx. |
| • If you operate the |
| The expiration date of the cleaning liquid is 6 months after it is opened. | in the detergent cartridge dilutes and the water inside the tank will | |||
| become a cleaning liquid. | ||||
| If you do not use the cleaning liquid for more than 6 months, throw |
| |||
|
|
|
|
|
|